MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: GTI Dave 30 on June 07, 2015, 10:33:11 am
-
Hi trying to Un do front wheel hub bolt on edtion 30 24 mm extension bar snaped that tight using a breaker bar jump on it still not moving any help please need to get to cv boot
-
What length breaker you using? Guess you still got wheel on, and doing through the centre bore of the wheel?
-
Yes car on ground 3ft breaker
-
Hmm, cannot really assist much more over the net! sounds like you got the tools for the job. What type of bolt is in there as theres a 6 sided and a 12 sided? My next option would be a bigger bar I guess, or extend the one you got although your not meant to :evilgrin:
Hopefully someone with a bit more experience will be along :happy2:
-
12 sided
-
Ideally you'll need a 3/4" impact socket and a 1M 3/4" breaker bar to do it by hand, they are tight as hell and most likely a bit corroded too. Or with wheel off ground get someone to press brake pedal and undo with impact gun
-
Cheers