MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: ClassyDubber on June 16, 2015, 02:01:14 pm

Title: Apr stage 2+. Ko3 dyno print outs
Post by: ClassyDubber on June 16, 2015, 02:01:14 pm
Has anyone got a apr map on a ko3 with dyno print outs. Find mine is very underpowered
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: dansmith180 on June 16, 2015, 06:19:57 pm
Have you checked your diverter valve? Could be easily losing you 50bhp+ if its split
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: ClassyDubber on June 16, 2015, 09:55:43 pm
Yes changed dv new plugs full service pcv delete. Map just doesn't seem impressive
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: bacillus on June 16, 2015, 10:53:11 pm
Are you sure you have the correct map selected?
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: ClassyDubber on June 18, 2015, 02:13:17 pm
Had the stage 2 map.  Got fuel pump and went and has stage 2 +.  But not much difference
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: dansmith180 on June 18, 2015, 02:34:37 pm
Yeh you should gain a lot more low down touque, not much top end though. Best thing to do is get it on the rolling road and see what's its making. Should be like 285ish BHP and 350ish lb/f
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: bacillus on June 18, 2015, 05:11:45 pm
Quote from: ClassyDubber on June 18, 2015, 02:13:17 pm
Had the stage 2 map.  Got fuel pump and went and has stage 2 +.  But not much difference

I don't know what maps you have installed but usually with APR you can switch maps with you cruise control.
I'm wondering if you somehow you have the stock map selected instead of the 2+ one...
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: Beej on June 19, 2015, 09:19:51 am
I know I'm not on an apr map, but I went and spoke to an apr dealer local to me regarding some issues I was having, but they claimed that my revo 2+ map was close to figures they would get. Mine was dyno'd at 278bhp and 288lbfts if this helps. I reckon it's low, but I keep getting told it's not
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: Dan_FR on June 19, 2015, 10:26:04 am
Torque may be a little low but it depends on the Revo settings. Peak HP is about right, actuator pre-load and appropriate mapping (custom) needed for more.
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: ClassyDubber on June 23, 2015, 12:52:55 am
A friend has same apr stage 2 + and dyno'd around 250bhp.  Raced a stage one tfsi with a back street map and was side by side
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: A3_Atif on June 23, 2015, 10:24:23 am
Whereabouts are you located? You could be losing boost or not meeting the specs on the fueling side... some VCDS logging would soon show any errors if present...
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: DANBOY66 on June 23, 2015, 12:14:09 pm
@alexharvey (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=8330) 

Alex's stage 2+ k03 r-tech tuned gti makes 280 bhp -375 lb/ft torque  :drool: it might even be a little bit more

figures look low on torque
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: Wooosh on June 23, 2015, 01:30:00 pm
@MJGib (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=10061) Is APR Stage 2+ Ko3.
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: alexharvey on June 23, 2015, 10:09:22 pm
@DANBOY66 (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=8622)   its 289 bhp  :grin:

9 bhp is alot !!! lol
Title: Re: Apr stage 2+. Ko3 dyno print outs
Post by: dansmith180 on June 23, 2015, 10:10:51 pm
Quote from: alexharvey on June 23, 2015, 10:09:22 pm
@DANBOY66 (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=8622)   its 289 bhp  :grin:

9 bhp is alot !!! lol

Dont you mean 289.45731bhp  :laugh: