MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Ricky123 on June 22, 2015, 02:05:03 pm

Title: Cylinder head removal and refit AXX engine and balance shaft delete???
Post by: Ricky123 on June 22, 2015, 02:05:03 pm
Is there a guide/how to for removing the head on the AXX engine?

Started the stripping process ready for removal. Do the cams have to come out to get to the head bolts? I also need the torque settings and tightening sequence for refitting.

Looked on the guide section but the links to the service/repair manuals don't seem to work?

EDIT***

While the car is off the road and I've stripped the engine bay to take the head off, I've been lookin to see if there's any common problems to rectify at the same time.

I've heard a few stories of failed oil pumps. I was just wondering if the balance shaft delete with 1.8t pump is the best or only way to resolve this before it happens? And if so is it worth doing now or are failures not common enough to worry about??
Title: Re: Cylinder head removal and refit AXX engine
Post by: fab5freddy on June 22, 2015, 02:37:33 pm
This might help

http://www.pelicanparts.com/techarticles/Volkswagen_Golf_GTI_Mk_V/65-ENGINE-Replacing_Your_Head_Gasket/65-ENGINE-Replacing_Your_Head_Gasket.htm (http://www.pelicanparts.com/techarticles/Volkswagen_Golf_GTI_Mk_V/65-ENGINE-Replacing_Your_Head_Gasket/65-ENGINE-Replacing_Your_Head_Gasket.htm)
Title: Re: Cylinder head removal and refit AXX engine
Post by: Ricky123 on June 22, 2015, 02:47:03 pm
Thanks  :happy2: exactly what I was looking for.
Title: Re: Cylinder head removal and refit AXX engine
Post by: dazza on June 22, 2015, 02:51:48 pm
Thats a lot of work! good luck  :happy2:
Title: Re: Cylinder head removal and refit AXX engine
Post by: Ricky123 on June 22, 2015, 02:55:18 pm
Cheers... I've done head gasket replacements and a couple of rebuilds on the past but not on a tfsi lump.

There's a lot more to this than my old Cvh s2 escort RS turbo lol
Title: Re: Cylinder head removal and refit AXX engine and balance shaft delete???
Post by: Ricky123 on June 23, 2015, 12:21:25 am
Bump.. Edited with balance shaft delete enquiry