MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: GTi-Andy on June 24, 2015, 08:52:58 am

Title: Anyone work at VW that can check a TSB for me?
Post by: GTi-Andy on June 24, 2015, 08:52:58 am

Ive run a VCDS scan a keep getting the following codes, although ti doesn't seem to affect performance/running of the car etc.

However after searching around on the net there seem to be talk of a TSB for these codes, can someone please help??

008200 - Intake Manifold Flap; Bank 1
               P2008 - 001 - Electrical Malfunction
             Freeze Frame:
                    Fault Status: 01100001
                    Fault Priority: 0
                    Fault Frequency: 2
                    Reset counter: 255
                    Mileage: 71797 km
                    Time Indication: 0
                    Date: 2012.14.10
                    Time: 15:01:29

             Freeze Frame:
                    RPM: 1337 /min
                    Load: 13.3 %
                    Speed: 26.0 km/h
                    Temperature: 27.0°C
                    Temperature: 13.0°C
                    Absolute Pres.: 1000.0 mbar
                    Voltage: 14.478 V

012600 - Intake Manifold Runner Control
               P3138 - 008 - Regulation Deviation
             Freeze Frame:
                    Fault Status: 01101000
                    Fault Priority: 0
                    Fault Frequency: 2
                    Reset counter: 255
                    Mileage: 71797 km
                    Time Indication: 0
                    Date: 2012.14.10
                    Time: 15:01:29

             Freeze Frame:
                    RPM: 1337 /min
                    Load: 12.5 %
                    Speed: 26.0 km/h
                    Temperature: 27.0°C
                    Temperature: 13.0°C
                    Absolute Pres.: 1000.0 mbar
                    Voltage: 14.478 V

Title: Re: Anyone work at VW that can check a TSB for me?
Post by: bacillus on June 24, 2015, 09:56:49 am

What year is your car?
IMO you need to replace the flapper motor. There was a tsb to update the software but that didn't work for most and required a new motor.

Title: Re: Anyone work at VW that can check a TSB for me?
Post by: GTi-Andy on June 24, 2015, 10:06:26 am

@bacillus (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=49) 2007 AXX engine

I was hoping that the software update would solve it before going down replacing the motor route.

Is the new motor covered by the TSB?

Title: Re: Anyone work at VW that can check a TSB for me?
Post by: Teutonic_Tamer on July 16, 2015, 05:05:29 pm

Have you actually tried to manually move the flaps?

And questions questions: what oil do you use, and what air filter is fitted?

Title: Re: Anyone work at VW that can check a TSB for me?
Post by: GTi-Andy on July 16, 2015, 10:17:07 pm

No need at all for that flippant answer pal. All I need to know if there's a TSB that I could pursue.