MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Joe Hryszko on July 10, 2015, 05:19:23 pm

Title: Aftermarket Exhaust advice
Post by: Joe Hryszko on July 10, 2015, 05:19:23 pm
Hi guys,

After sorting my wheels out im now looking at getting a different exhaust system for my mk5 Gti and im just after a little bit of advice!

Im after a Cat back system that when at idle and low revs such as parking, it isn't extremely loud... (this is due to my job being a dj i come home at ridiculous hours in the morning and would rather not have the whole neighbourhood hate me)  :innocent:

However, when putting your foot down I want a bit more of a throaty exhaust note over the standard system, ive heard good things about the miltek catback system but just wondering if anyone has any other suggestions?

Regards,
Joe
Title: Re: Aftermarket Exhaust advice
Post by: AndyBrown on July 10, 2015, 05:29:59 pm
Bcs powervalve is perfect for your situation.
And any real DJ would go to an afters and not be home till the afternoon  :signLOL:
Title: Re: Aftermarket Exhaust advice
Post by: mk5-beast-91 on July 10, 2015, 05:32:38 pm
As above or milltek.
Title: Re: Aftermarket Exhaust advice
Post by: Joe Hryszko on July 10, 2015, 05:35:45 pm
Bcs powervalve is perfect for your situation.
And any real DJ would go to an afters and not be home till the afternoon  :signLOL:

There are very rarely any afters where I live, plus I finish at 6am!  :signLOL: thank you mate, will have a look into that!
Title: Re: Aftermarket Exhaust advice
Post by: Joe Hryszko on July 10, 2015, 05:37:37 pm
Bcs powervalve is perfect for your situation.
And any real DJ would go to an afters and not be home till the afternoon  :signLOL:

Any ideas where to get these from, best place?
Title: Re: Aftermarket Exhaust advice
Post by: AndyBrown on July 10, 2015, 05:51:16 pm
Message @nige bcs (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=331) you get forum discount aswell.
Title: Re: Aftermarket Exhaust advice
Post by: GTIFR on July 11, 2015, 07:07:31 pm
Joe, keep us updated with your choice and thoughts when you get it done - I'm thinking about a milltek cat back non res at the moment