Make a donation

Author Topic: Replacing glovebox front  (Read 1684 times)

Offline Duke

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 4
  • Posts: 126
Replacing glovebox front
« on: August 11, 2013, 10:42:20 am »
My glove box plastic is looking quite tired and is marked by the previous owner in a few places. Pic below, although it looks worse in real life -



Has anyone swapped the cover bit before? Anyone know the part number  :confused:

Thanks

Offline Palooza

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 24
    • Email
Re: Replacing glovebox front
« Reply #1 on: August 13, 2013, 11:58:17 am »
You could just replace the whole glovebox? They're pretty easy to remove and not expensive off ebay, the fourth one down that i saw http://www.ebay.co.uk/itm/vw-golf-mk5-glovebox-glove-box-breaking-tdi-tsi-/111137315965?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AGolf%7CPlat_Gen%3AMK+V&hash=item19e04cdc7d

only £30 says its in good condition, youlle more than likely get something back from yours also.

Offline Duke

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 4
  • Posts: 126
Re: Replacing glovebox front
« Reply #2 on: August 13, 2013, 07:12:24 pm »
Thanks, haven't thought of that. Would need some decent pics to make sure it is better than mine but will keep an eye out  :driver:

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: Replacing glovebox front
« Reply #3 on: August 13, 2013, 08:15:26 pm »
It's easy to change the front lid, you can get them for much cheaper than £30 on ebay too
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline Duke

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 4
  • Posts: 126
Re: Replacing glovebox front
« Reply #4 on: August 13, 2013, 09:04:48 pm »
Do you know the part number or have any further info please?

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: Replacing glovebox front
« Reply #5 on: August 13, 2013, 09:07:01 pm »
I don't sorry, I sold a glovebox for a few pounds on here but have deleted the pics with it.
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Replacing glovebox front
« Reply #6 on: August 17, 2013, 12:34:45 am »
I replaced my glovebox for a used one bought off ebay which was pretty much brand new. It too longer to unwrap the damn thing than to fit it!

2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline Duke

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 4
  • Posts: 126
Re: Replacing glovebox front
« Reply #7 on: August 17, 2013, 08:21:15 am »
Was that the whole unit? Is it just a few of the usual torx screws holding it in place?

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Replacing glovebox front
« Reply #8 on: August 18, 2013, 11:46:01 pm »
That was the whole glovebox. This should help - http://www.mk5golfgti.co.uk/forum/index.php/topic,15294.0.html

To remove Screw 3 you need to remove the plastic trim above the ashtray, beneath the heater controls :)
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline Duke

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 4
  • Posts: 126
Re: Replacing glovebox front
« Reply #9 on: August 19, 2013, 07:34:31 pm »
Perfect, thanks for the help  :laugh: