Hello guys. Car has a stage 3 Revo software and has the following mods :
2006 Black Magic GTI |
Milltek Non-Res Turbo-Back | BSH 27mm RSB + H&R 26mm FSB | BSH pendeleum mount |
Evoms V-Flow| Stri Racing gauges | PCV fix | Sachs racing clutch | Forge Short shift + 42DD/FFE bushings | Bilstein PSS10 | Peloquin LSD |
K04 turbo |
S3 injectors | IE rods/Calico bearings | S3 front brakes + Tarox F2000 discs + DS2500 pads |
S3 FMIC |
S3 camshafts |
Autotech fuel pump | 235/35/ZR19 GY F1 asymmetric on BBS RS-GT |
REVO Stage 3Here's my latest logs and dyno (Revo setting used was 9-8-9):
http://img197.imageshack.us/gal.php?g=fuscobalmotorcp.jpgCar seems to run great. What I'm a little worried about :
- Exhaust temps of over 999 degrees
- The little dip in the boost response at around 5000rpms
- Actual fuel pressure is 3-5 bar under the requested of 130 bar (I've ordered the RS4 pressure valve wich is rated at 136 bar and I've heard cured this problem)
- The low pressure seems to be pretty low compared to the requested (this might be also related to the high pressure system
- Timing retard seems to be a little to much (maybe I should set timing from 8 to 7 ?)
Any comments would be highly appreciated !