All Things Mk5 > Performance Modifications

Induction kit

<< < (3/3)

Dan_FR:
Yep, it's not a simple 90 degree silicone and the top section is oval. From memory I think an 81 or 82mm round pipe can be manipulated to fit on to the airbox, and the turbo end is about 60mm.

I made something similar a while ago when I used a factory MAF housing as part of my intake, made quite a difference, lot less restrictive than the standard silly plastic flexi pipe thing though

Vwgtiking:
Any pics and how?

Dan_FR:
Possibly, will look later. It won't be suitable for the factory airbox though, as you can see in the link that the pipe angles forward to meet the airbox at the right position. My MAF housing was removed from the airbox and formed part of my own home made intake, so sat further back in the engine bay.

Ricky123:
I've got a forge twintake with itg foam filters fitted to it instead of the forge carbon filters and also have a gfb DV and there's minimal "whoosh" noise. I can barely hear it

Navigation

[0] Message Index

[*] Previous page