All Things Mk5 > Members Rides
R5GTT'S Cars rapid
theminty1:
--- Quote from: r5gtt on August 29, 2017, 10:31:46 pm ---
--- Quote from: theminty1 on August 29, 2017, 10:22:20 pm ---Yes they do. This is for the dipped beam.
http://www.horizonleds.co.uk/5th-gen-4000-lumens/h7-5th-gen-4000-lumens
These are the ones I had looked at but couldn't figure out how to fit. Quite pricy not to fit
If you can have another look when you get the time . Ta
--- End quote ---
The H7 I fitted only fit one way without a reversible base and a lot cheaper than those :surprised: the ones you've linked have two maybe three ears on them if that's what you're asking about?. They're wrong for our cars as both dip and main beam are H7 with one way of fitting.
--- End quote ---
Oh they are pricey thats why all the questions.
Its how the 12volts connect as the 12volts is part of the quarter turn thingy I keep going on about.
Working backwards, so basically theres the bulb, a wire goes to some kind of Led driver, but the Led driver needs 12volts. Its that connection i am interested in. A photo would be appreciated if you have the time. :happy2:
r5gtt:
--- Quote from: theminty1 on August 30, 2017, 07:16:05 am ---
--- Quote from: r5gtt on August 29, 2017, 10:31:46 pm ---
--- Quote from: theminty1 on August 29, 2017, 10:22:20 pm ---Yes they do. This is for the dipped beam.
http://www.horizonleds.co.uk/5th-gen-4000-lumens/h7-5th-gen-4000-lumens
These are the ones I had looked at but couldn't figure out how to fit. Quite pricy not to fit
If you can have another look when you get the time . Ta
--- End quote ---
The H7 I fitted only fit one way without a reversible base and a lot cheaper than those :surprised: the ones you've linked have two maybe three ears on them if that's what you're asking about?. They're wrong for our cars as both dip and main beam are H7 with one way of fitting.
--- End quote ---
Oh they are pricey thats why all the questions.
Its how the 12volts connect as the 12volts is part of the quarter turn thingy I keep going on about.
Working backwards, so basically theres the bulb, a wire goes to some kind of Led driver, but the Led driver needs 12volts. Its that connection i am interested in. A photo would be appreciated if you have the time. :happy2:
--- End quote ---
my ones cost me £12 the pair off eBay and are straight plug and play into the existing wiring and no additional drivers on these. I see the more pricey ones do and thinking they plug straight into the headlight bulb connection as where else would it go :signLOL:
theminty1:
I am not the brightest sorry.......... but in your photo there is the black plug with the male spade connection i just dont know how it connects the the quarter turn thingy. I will need to look at my car again. I must be missing something here. :ashamed:
r5gtt:
The connector with the two male spades plug into the connector that usually connect directly to the h7 light bulbs
theminty1:
I have had a quick snoop on the internet and now see why we are at crossed wires.
My car has original ordinary golf headlight non xenon so it has the quarter turn thingy. This is what holds the bulb in place and provides the power to the bulb. I do not have the stainless wire/clip that normally holds in the bulb so as far as i can figure out it cant be done :sad1: Unless of course you have a solution.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version