All Things Mk5 > Performance Modifications

Putting R32 front calipers on an Ed30

(1/3) > >>

PhilNUK:
What would I need I  order to get r32 front calipers to fit to my ed30?

I have found calipers...  Just wondering about disc size and spacers etc...  Anything I need to worry about?

Thanks

Beddie:
Assuming you have the calipers and carriers then the only thing you'll need is brake lines and discs,
No spacers required for the R32 calipers (even on 17" Monzas) and disc size you can use either the 345mm R32 disc or the 340mm Audi TTS version
 :happy2:

Andy:
Might have to change the front flexi pipes

PhilNUK:
Thanks for the replies

So a disc and pad set like these would be fine? Or are there a disc brand I should avoid? http://pages.ebay.com/link/?nav=item.view&id=251439362780&alt=web

PhilNUK:
Just seen this set on eBay which is tempting as they are refurbished brembo with discs and lines with them but am I right in saying these are for the rear?
http://pages.ebay.com/link/?nav=item.view&id=271942697407&alt=web

Edit: spoke to the seller and they are for the front with EBC discs and pads

Navigation

[0] Message Index

[#] Next page