All Things Mk5 > How to Guides / Troubleshooting

Alarm not working

(1/2) > >>

kam:
Guys the alarm on my mk5 gt tdi stopped working I changed the alarm siren for a second hand unit which the breaker tested but fitted it and still nothing do I need Vag com to activate it or should it just work?
Also could it be something else fuse??-any help would be appreciated thanks

skard:
Did you see him test it? A used one that has been sitting getting no charge is probably dead also.

Yes VCDS will tell you what is up.
Could be a fuse, wiring, faulty door/bonnet/boot module so the car doesn't actually think it is locked

kam:
Guys I had a mate run VAg com and it has thrown up the following faults can anyone tell me what I need to change to get the alarm working http://i1144.photobucket.com/albums/o481/kamal7335/2014-02/139273F8-0B2C-428C-8351-0F0C74F51932_zpsycdlims8.jpg
http://i1144.photobucket.com/albums/o481/kamal7335/2014-02/4E98011E-0517-421D-B6E2-5549F0DD4A00_zps9t0yvmws.jpg

skard:
http://wiki.ross-tech.com/wiki/index.php/01134

He needs to go into 46-convenience and open measuring blocks, it is there what tells you current status of the sensors and siren

RetroRaz:
Saw this once on a customers car. Turned out to be a fuse,

Check fuse 35, should be 5amp

Sent from my SM-G928F using Tapatalk

Navigation

[0] Message Index

[#] Next page