So I've put the dieseil bkd engine back in my jetta as im bored of it being a project and not making any progress so its going up for sale.
Now i have an interesting issue (considering it was flawless when i took it out)
She struggles to start but does start. It cranks for a second or so then starts spluttering to life. When the first coughs of life occur, i get an "engine fault" message and the glow plug light just blinks at me.
I have the foloowing
Wednesday,08,June,2016,18:42:01:24962
VCDS Version: Release 15.7.4 (x64) Running on Windows 10 x64
www.Ross-Tech.com                Address 01: Engine       Labels: 03G-906-016-BKD.lbl
Control Module Part Number: 03G 906 021 KK    HW: 03G 906 021 KK
  Component and/or Version: R4 2,0L EDC G000SG  9970
           Software Coding: 0000072
            Work Shop Code: WSC 66565 257 00032
                      VCID: 72EB8D1C6DCEA3AE78-8026
Fault Codes have been Erased
3 Faults Found:
012546 - Motor for Intake Manifold Flap (V157) 
               P3102 - 000 - No Signal
000802 - Engine Speed Sensor (G28) 
               P0322 - 000 - No Signal - MIL ON
000275 - Intake Air Temp. Sensor (G42) 
               P0113 - 000 - Signal too High
The speedo works so im not sure where to look next. Any ideas?
  EDIT: AS i pressed "post" i see that it says engine speed sensor and not vehicle speed. That might explain a couple things