All Things Mk5 > Members Rides
My little MK5 2.0TDI R-line build thread
AaronSeext:
Hmm, at this rate, we should be expecting an MK6 TDI come Christmas time.
Are you keeping your "sporty intentions" MK4 TDI?
Christiank:
--- Quote from: AaronSeext on September 12, 2017, 03:01:05 am ---Hmm, at this rate, we should be expecting an MK6 TDI come Christmas time.
Are you keeping your "sporty intentions" MK4 TDI?
--- End quote ---
Hehe naah... Last things I need from a MK6 Golf is the R model DRL's and the GTI model rear lower valance.
Christiank:
Recieved some parts to start my brake build.
Also had some trouble with limp mode and a VCDS error on cylinder 4.
changed to injector harness and glow plug to new genuine parts.. No luck though.
Not sure how many miles these plugs have run, but they sure didn't seem fresh anymore xD
Also started to look on my DRL options. Really want the facelift VW transporter DRLs since they are a LED line and noget single bulbs like the mk6 R or the Audi S6. However I'm not sure what'll look like so started out fitting these new Osram LED drls to see if it's something thats worth go further with or just stick the the mk6 R drls instad.
Also got the airbag indicator error away from the dash by fixing the wirering issue you have when you got from Mk5 dashboard to a Mk6 one.
No errors now :)
Christiank:
Finaly found an engine that I can rebuild for my car.
Since I never really was satisfied with the Side Assist solution I’ve ordered the genuine VW mirror covers and cutted it up to place into the tweeter trim.
So far I’m very satisfaied - abit sanding and filling tomorrow again and it should be ready to test fit.
Also I’ve finally found an engine I will rebuild. Should arrive most next week ready to be disassembled to be cleaned. Already got all new seals from Darkside to rebuild. :driver:
Also finally got all parts to finish my rear NQSBBK brake setup.
Just need to clean the calibers and have it painted again :pomppomp:
Will post some pictures tomorrow guys!
Christiank:
Some pictures of the work to fit the "Side Assist" indicator into the tweeter housing.
Pretty satisfied with this instead of the other Honda Accord indicators. Now I can finaly make this projekt complete hopefully soon :)
--
Today I've checked Elsawin to get all the wirering info needed to retrofit the anti theft/anto tow alarm system.
Already installed the sirene, so just need to make my wire harness to the interior componets and then this also can finaly be completed.. :jumpmove:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version