All Things Mk5 > Performance Modifications

Sach clutch fitted but....

<< < (11/17) > >>

Msportman:
It would seem after reading this thread that there are real issues with the MK5 clutches for some. It's a shame as the car is a brilliant package and remapping to these levels should not give issues on a 'performance' clutch!

There is so much more choice on the 1.8t set up....I ran a VR6 Sachs item on my APR Stage 3+ pumping out 350bhp/350lbs and it held it no problem.....cheap as chips from Jabbasport with a singlemass flywheel.

Good luck with it.       

fuscobal:
Problems here are not torque handling but rather gear engagement smoothness !

fuscobal:
Ok, the SMF clutch is back on the car. I will have to do some 500-1000kms before I can WOT but the first impressions are positive. Engagement is definately easier !

danishmkvgti:

--- Quote from: fuscobal on March 26, 2010, 07:16:01 am ---Ok, the SMF clutch is back on the car. I will have to do some 500-1000kms before I can WOT but the first impressions are positive. Engagement is definately easier !

--- End quote ---

I have just recieved my kit, but the bearing is missing, isn't it a part of the kit???  :confused:

fuscobal:
No, it isn't. You must buy it separately !

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version