Make a donation

Author Topic: Number plate holder  (Read 251 times)

Offline blingsta

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 125
Number plate holder
« on: November 09, 2021, 05:46:03 pm »
Hi guys,

Can anyone post a pic of what I need to screw the number plate holder to the car please.
Or is there nothing specific used ? A self taper screw?

Offline Trow81

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 18
  • Posts: 225
    • Email
Re: Number plate holder
« Reply #1 on: November 09, 2021, 05:49:21 pm »
Hi mate I literally used self tapping screws or you could just stick with number plate strips.


Sent from my iPhone using Tapatalk

Offline bobby_fodge

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 20
  • -Receive: 31
  • Posts: 738
    • Email
Re: Number plate holder
« Reply #2 on: November 09, 2021, 06:13:32 pm »
Mine was also secured with self tappers. I took them off and secured the holder with 3m self adhesive stickers.

Offline blingsta

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 125
Re: Number plate holder
« Reply #3 on: November 09, 2021, 07:35:11 pm »
Sorry chaps.. I was talking about the front holder, but I'd assume just some self tapers with washers would do the job

Offline Trow81

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 18
  • Posts: 225
    • Email
Re: Number plate holder
« Reply #4 on: November 09, 2021, 07:43:25 pm »
Ah sorry pal I have a smooth front grill with a short plate I would go down the 3m route personally so not to leave holes everywhere on the front


Sent from my iPhone using Tapatalk

Offline LC5F

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 15
  • -Receive: 50
  • Posts: 691
Re: Number plate holder
« Reply #5 on: November 25, 2021, 07:28:30 pm »
The OEM holder? - thats got push pins that expand in the holes.
Or you could stick the plate to the bumper without holder...needs a lot of sticky pads and bending - but looks better than with holder.