All Things Mk5 > Mk5 General Area

VCDS - ECU Engine Security Code Needed

<< < (3/3)

GVK:
Just thinking aloud  :laugh:

pudding:
Well, you could be right, not something I ever tried on mine!  :grin:

OllieVRS:

--- Quote from: GVK on September 01, 2023, 09:28:36 pm ---Can you do a cluster check by holding in one of the buttons and key on so ALL the lights illuminate?  :thinking:

Can on some cars.

--- End quote ---

Could you elaborate which button I'm supposed to hold to illuminate the lights? Would like to give it a shot.

Also I'm pretty sure I did look into the cluster light tests in VCDS, but the cruise control light wasn't available to check. I'll have another look to make I didn't miss it.


--- Quote from: Pudding on September 01, 2023, 09:00:50 pm ---Hmmm, weird.  Is it enabled in the CAN Gateway's fitted features long coding helper?  I can't remember the exact details as it's been a while, but if you go into the CAN gateway module, there's a big list of what's fitted to the car.

It's possible the car can see it and operate it, but the clocks haven't been told it's fitted?

--- End quote ---

Okay I'll have a look there too, thanks for the advice. It's super weird that it fully works but there's no light on the dash for it.

GVK:
As said, not sure if it possible on your car but on things like Fords and BMW can hold the trip reset button in whilst putting key on and the whole cluster will light up and in some cases sweep the gauges too.

Navigation

[0] Message Index

[*] Previous page