All Things Mk5 > How to Guides / Troubleshooting

Help fitting a DBilas Intake for PD140!

(1/2) > >>

alex_chung:
Hi All,

Just recently purchased the DBilas air intake for my 2.0 TDI to replace my BMC CDA as I felt the BMC CDA was taking cold as well as hot air. Unfortunately, the DBilas didn't come with any fitting instructions at all. Can anyone help at all?
I know that some of the ED30/GTI/Cupra boys have had the DBilas intakes for their cars and that fitting the intake from the front of the car is similar.
I take it the two metal clips at the front of the intake just screw into the holes that are already there for the OEM intake?
Also can anyone tell me how to remove this damm clamp that is at the MAF??



This is what its supposed to look like fitted:



Thanks!
Alex

MattPoss:
Sorry I can't help mate but i'd be interested to see what you think of this once you get it going....

Matt

stealthwolf:
Hahahaha I remember trying to take that off when I wanted to change the filter. Was almost as impossible as trying to take the engine cover off.

This is what I used: clicky

Made life sooooooooo much easier.

alex_chung:

--- Quote from: stealthwolf on June 21, 2010, 11:30:10 pm ---Hahahaha I remember trying to take that off when I wanted to change the filter. Was almost as impossible as trying to take the engine cover off.

This is what I used: clicky

Made life sooooooooo much easier.

--- End quote ---

I was in Halfords yesterday picking up a set of Laser Hose Clip pliers, damm should have gotten the these instead!
Oh well another tool to add to the toolbox then  :grin:
Alex

golfman:
Alex any updates on this i would be interested too hear about this :happy2:

scott

Navigation

[0] Message Index

[#] Next page