All Things Mk5 > Performance Modifications
The ultimate Dyno Graph thread
mark53:
--- Quote from: ktlstar on November 18, 2011, 10:41:47 pm ---336ftlb very good if thats accurate. Someone posted a revo stage 1 on a ed30 and got 290ftlb.
Are you local to AMD ?
--- End quote ---
about 30 minutes away
daz_pd:
My Stage 1 2.0 TSI, happy with the figures, but a little concerned about the "spike" low down, anyone any thoughts the dyno operator said its because its running too rich, also see my AFR below
damoegan:
--- Quote from: daz_pd on November 20, 2011, 10:32:01 am ---My Stage 1 2.0 TSI, happy with the figures, but a little concerned about the "spike" low down, anyone any thoughts the dyno operator said its because its running too rich, also see my AFR below
--- End quote ---
What software are you running?
Rich running wont cause a boost/torque spike, its all down to how its mapped..
daz_pd:
Well I don't like to name and shame either, its a well known tuner, I havent (since I last checked) any fault codes logged, so it has to be the map then? My only other mod is a carbonio intake
shark_90:
The spike is down to the DSG, we've seen it on our dyno too. The manual version on 100% identical map doesn't do that, it's a smooth torque curve. We did a DSG remap on that car in order to solve it but unfortunately the customer didn't have time to wait for us to re-run the car. He is coming back for other work though, so we will have the opportunity to dyno it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version