All Things Mk5 > Performance Modifications

370bhp from a Edition 30 Stage 2??

<< < (3/16) > >>

Janner_Sy:
must admit my vRS was plus minus 2Hp on the 4 dyno dynamics rollers i used. one of which were

JKM-portsmouth,
Alan jeffrey-plymouth,
IAM motorsport-kent and
Sanspeed kent.


--- Quote from: Saint Steve on December 22, 2010, 07:13:11 pm ---
Perhaps they strap the cars down more effectively then other tuners perhaps??

--- End quote ---

could quite easily be this.  Think this was after the surrey RR day.  He didnt make the figures he did @ surrey RR, so they went to new rollers iirc and made them

MAT ED30:
 :signLOL: jkm the gods of rr results  :signLOL: bollox they must just like giving low numbers to you southerners  :signLOL:

PDT:
Standard GTI on our dyno made 198.2bhp on Saturday, PD140 audi a4 made 142bhp and a standard ED30 made 231bhp last week.

strapping cars may be one thing, but as long as you strap according to the way that DD instruct you to do so durung your training then you cant go far wrong, most cars we run in 3rd gear, if strapped and loaded up correctly with the correct settings in the dyno then wheelspin isnt a problem, wheelspin is obvious. When you look at a graph and the operator will see it instantly.

I know a fair few Revo dealers that also see a consistent 350+ from stage2+ on a dyno dynamics dyno so its a mystery. We have a customer that has an s3 with stg2+ software, it made 357hp on ours and 398hp on another local dyno (not dyno dynamics) so shows that some will read sensible figures, other tuners use their dyno as smile machines  :grin:

Choose your tuner, use their dyno for comparisons before/after mods, dont bother going 'number shopping' around dynos and you will get a good consistent repeatable comparison.  

TrickGTI:

--- Quote from: MAT ED30 on December 22, 2010, 07:30:45 pm --- :signLOL: jkm the gods of rr results  :signLOL: bollox they must just like giving low numbers to you southerners  :signLOL:

--- End quote ---


haha makes you spend more moneys you see  :xmaspresent:

chungster:
best way would be for someone to do a dyno run a few RR's...then have their engine removed and ran on an engine dyno.

THEN we can say who's crap and who's closer to the truth.

 :happy2:

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version