All Things Mk5 > How to Guides / Troubleshooting

retro fit tyre pressure kit

<< < (3/4) > >>

DamoP:

--- Quote from: whiteatom on March 10, 2011, 10:33:36 pm ---Hi

Can anyone point me in the right direction for some instructions to fit this kit ? I have the loom + switch but no english instructions.

Many thanks in advance

--- End quote ---
What do you need to know?? all the info i used if off this thread

whiteatom:
The kit I got has a black plastic plug connector and then 3 grey wires (not connected in ) with no instructions on what order they go in ! I was expecting a plug and play loom for the switches then connect the 1 wire to ABS unit + re - code.

Any info ?

Eddie-NL:
You need to remove 3 wires from the ESP plug, then you insert them into the plug supplied. The 3 wires on the loom go to the ESP plug

ESP Plug
GREY Wire (pin 3) - Remove and fit to pin 1
BROWN Wire (pin 6) - Remove and fit to Pin 3
BLACK AND BLUE or BLACK AND GREEN (pin 4) - Remove and fit to pin 2

whiteatom:
Just in process of fitting , can anyone confirm which pin the wire to ABS controller needs to be in ? On the loom wire it says pin 07 , but in Germany instructions says Pin 27 / Pin 41 ?

Many thanks

I have a mk5 Gt tdi 4 motion on 05 plate if this makes any difference ?

Eddie-NL:
PIN 27
unless you have DSG

Navigation

[0] Message Index

[#] Next page

[*] Previous page