All Things Mk5 > How to Guides / Troubleshooting

Changing Gearknob & Ashtray trim...

(1/3) > >>

steverobb1973:
I's sure its really easy to do but as I dont want to stick screwdriver in places I shouldnt and risk damaging trim.... Could someone please tell me the best way to remove a gearknob and gaitor (compleet with plastic trim) - assume re-fitting is reversal.

Also I want to remove the ashtray trim and replace with a storage tray - again can someone please advise easiest way to remove this part.

Many thanks in advance.

Steve

golfman:
Hi Steve
pull the bottom of the gearknob trim up and then you will see this-
you need to open up the clamp and then pull the gearknob up and off,then look down at the ashtray and you will see 2 screws just undo them and unplug the 12v socket and any other buttons you have installed,and then put back in your new bits :happy2:

scott

Gene Hunt:
Didn't need to remove the clip on my last GTI when i changed it,just pulled & it came straight off. :happy2:

steverobb1973:
Both jobs done!

Piece of p!$$

Thanks Guys :happy2:

Steve

MJR:
Where did you get storage tray from? me likey  :smiley:

Navigation

[0] Message Index

[#] Next page