All Things Mk5 > How to Guides / Troubleshooting

Changing Gearknob & Ashtray trim...

<< < (3/3)

DaveR77:

--- Quote from: golfman on June 07, 2011, 11:00:00 am ---Hi Steve
pull the bottom of the gearknob trim up and then you will see this-
you need to open up the clamp and then pull the gearknob up and off,then look down at the ashtray and you will see 2 screws just undo them and unplug the 12v socket and any other buttons you have installed,and then put back in your new bits :happy2:

scott

--- End quote ---

How do you go about just removing the ashtray, are the 2 screws that hold it down under the gearknob? If so then do DSG covers come off the same way?

steverobb1973:
To remove the ashtray you first have to remove the gearknob gaiter trim.... Then the 2 x torx screws can be located...

Steve

Navigation

[0] Message Index

[*] Previous page