All Things Mk5 > How to Guides / Troubleshooting
How to retro fit cruise control. Comprehensive guide
kisyov:
Hello friends, I need help. I have VW Caddy Maxi 2009 /same as golf mk5/, after retrofitting cruise control and MFSW , horn stop working and the buttons of SW Not working. I change my control module from mid line to highline /from 1K0-953-549-CQ to 1K0-953-549-CF /. From Ross-Tech website I saw that my Slip Ring is Type 2. I think, I did everything right, but only cruise control working, no buttons and no horn.
Parts I use.
1Q0 419 091 KUSZ – Steering Wheel / 17.11.2007 /
1K0 971 584 N – airbag harness / original harness from my not MFSW is same without N /
2k0 880 201 L 10QB - Airbag from my original SW
1k0 959 538 F – MFSW buttons
1P0 959 542 – MFSW control unit
1K0 953 549 CF – Control module
1K0 953 513 G – Cruise control stalk
Wipers stalk I didn’t change, it is with trip button.
Address 16: Steering wheel Labels: 1K0-953-549-MY9.lbl
Part No SW: 1K0 953 549 CF HW: 1K0 953 549 CF
Component: J0527 055 0111
Coding: 0000534
Shop #: WSC 01357 011 00200
VCID: 78FF0E6B0B2690DEAC3-802D
1 Fault Found:
01426 - Controls in Steering Wheel (E221)
004 - No Signal/Communication
I thought that My SLIP RING NOT working, after I put my old airbag harness from non MFSW and recoding the Control Module, horn start working and cruise control, too. So my SLIPRING is OK.
So what is wrong , where is my mistake? I want my MFSW to work. I this to change airbag harness, please suggest model.
martinatfc:
Can someone do mine for me?
I have a 2005 Golf GTI Mk5.
Cash up for grabs obviously.
My DIY skills are useless. :fighting2:
I'm based in Farnham, Surrey or Aldershot, Hampshire.
Octoparrot:
--- Quote from: martinatfc on April 07, 2019, 07:27:36 pm ---Can someone do mine for me?
I have a 2005 Golf GTI Mk5.
Cash up for grabs obviously.
My DIY skills are useless. :fighting2:
I'm based in Farnham, Surrey or Aldershot, Hampshire.
--- End quote ---
Do you know if you have the extra wire fitted?
kevster996:
I just updated my stalk to cruise control and updated the steering wheel control module to the CH version (new one off ebay). I have fitted an MFSW now but not coded yet. Now when I start up the right hand indicator goes all the time and using the stalk makes no difference?
I need to do the power steering reset as Ive lost this now too? My car is a 55 tdi 4motion - I wonder if I need to get a different slip ring? I'll check the part number. Bit dangerous to drive with indicators turning right all the time!
Parts I have:
- Cruise Control Indicator Stalk Arm OEM 1K0 953 513 F (wrong one?) (old one 1K0 953 513)
- slip ring 1K0 959 653 C (should ok with steering wheel module?)
- new steering wheel control module 1K0 953 549 CH off ebay (should work with my slip ring)
I need to wire in the extra wire to the ecu for CC - its only half done
Ive put the old stalk back on for now and its sorted the indicator issue...
ljc19630:
Niceeee
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version