All Things Mk5 > Mk5 General Area

Lumbar support retrofit and heated seats retrofit on MK5 Golf Help Please

<< < (6/6)

Eddie-NL:
i use a special tool

but you can use 2 small screwdrivers

jason_rmh:
All fitted and working!  :laugh:
Couldn't have done it without the help from this forum. I will do a proper write up for the how to section!
Thanks
Jas

foru2justnv:
Hi all
My seats are 2007 onwards as i only have one regulator. I have today swapped the looms over between passenger and driver seat (UK). The only plug now not connected is the blue connector 2 wire which i presume is seat occupancy sensor.
My real Question is I can see the brown wires on both the plugs but ive got different coloured wires. I just want to power up lumbar support for now directly to a fuse shunt. So i need to know which is the power wire on both seats if the brown is the ground.

Navigation

[0] Message Index

[*] Previous page