All Things Mk5 > Members Rides
James GTI Ko4 2.0tfsi 401bhp - launch control?
danishmkvgti:
7mm for the TT arms at max negative camber and 3mm from Cupra/S3 alloy hubs :happy2:
james:
is it to low?
luckyGti:
Looks far lower than mine which are on clubsports and i've just got over my rubbing issue by having it raised slightly.
RedRobin:
--- Quote from: james on April 24, 2012, 12:37:32 pm ---is it to low?
--- End quote ---
....I don't think so. Or at least, I just about get away with mine being as low as it is. I have to be extra careful over speed bumps and indoor car parks with ramps are a no-no, but not helped by the Mk5 GTI's long frontal overhang coupled with my OSIR front splitter.
I only rub on the front arch liners and only under very extreme loading into 90 degree corners and tight roundabouts. My bodyshop is sorting that out literally right now while they have my car for front wing rust repair under warranty.
I'm on KW V3's as well.
Also, I have the same AP front brakes plus S3 rear brakes. The S3 rears make a big difference to result in well planted and very even hard braking.
MAT ED30:
same height as mine i think
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version