All Things Mk5 > How to Guides / Troubleshooting

HOW TO :- Rear engine mount insert

<< < (5/6) > >>

bacillus:

--- Quote from: George on May 11, 2012, 10:30:28 am ---Can anyone confirm the torque rating for this please? I'm fitting this tomorrow morning

Thanks  :happy2:

--- End quote ---

http://www.mk5golfgti.co.uk/forum/index.php/topic,44007.msg510646.html#msg510646

Tfsi_Mike:

 :congrats: Great little how to Rich

Tfsi_Mike:

--- Quote from: apples12 on March 14, 2012, 04:55:25 pm ---£17.66 incl VAT from eurocarparts btw in case anyone was wondering! thats for the 'R' version of the mount for soot-chuckers!

they dont keep them in stock but can get them either same day if ordered before 11 (i think) otherwise next day!



--- End quote ---

What's that for? A diesel rubber?

mattypgolf:

--- Quote from: richwig83 on March 13, 2012, 02:48:28 pm ---Changing that complete mount it a ball ache. You have to remove the subframe and remove the old mounts, then get new mounts pressed in, subframe back on and the get the front re-aligned.

I would whack in an insert :-)

--- End quote ---

I've got a THS mount to fit, when you say re align.. What needs aligning?

rich83:

--- Quote from: mattypgolf on May 13, 2012, 10:25:40 am ---
--- Quote from: richwig83 on March 13, 2012, 02:48:28 pm ---Changing that complete mount it a ball ache. You have to remove the subframe and remove the old mounts, then get new mounts pressed in, subframe back on and the get the front re-aligned.

I would whack in an insert :-)

--- End quote ---

I've got a THS mount to fit, when you say re align.. What needs aligning?

--- End quote ---

Because you have to remove the subframe to install the THS or solid type mounts you will throw out the front geometry unless you can get the subframe back in exactly the same position as before *breath*

Navigation

[0] Message Index

[#] Next page

[*] Previous page