General > Detailing

right mix for snow foam

(1/3) > >>

Andy:
i can never get the mixture right for the snow foam but i was advised today to put a inch of snow foam in the bottle and fill up with water

Trekmeister:
I dont know if I was doing something wrong but I used autoglym snow foam which is ready mixed, filled the bottle and blasted it on, got a good thick covering but wasn't impressed with what it removed. A blast of water from the pressure washer seemed to do a similar job. Cant remember the make of the attachment i have but it looks the same as yours and cost nearly £50.

stealthwolf:
You need to fiddle with the settings. I also found different snowfoams came out differently. Autobrite magifoam seems to foam the best.

monte:

--- Quote from: maxitrol on September 03, 2012, 11:31:56 pm ---i can never get the mixture right for the snow foam but i was advised today to put a inch of snow foam in the bottle and fill up with water


--- End quote ---

That's what I've done from day one!
I've got the cherry foam and the mix is just right at 1"  :happy2:

Have you tried using hot water in the bottle too? Works great  :wink:

Jaywoo-GTI:
I do the same as described but top up with warm water, and use the foam lance at MAX foam and leave it at that,
I have heard that running it through with some APC cleans the lance and makes it perform better if your having trouble.

Navigation

[0] Message Index

[#] Next page