All Things Mk5 > Performance Modifications
W/Meth, fitted with pics
gazon69:
--- Quote from: Hurdy on October 16, 2012, 10:30:29 am ---James, the pump should really be below the bottle as it is gravity fed. If not it can cause pumping issues when the level drops and strain the pump. :smiley:
--- End quote ---
my bad, the instructions do state that the pump should be below and as close to the tank as possible. James, if you were to rotate your pump 180 degrees that would put the feed lines below your tank and suffice i would have thought. Though yours is a different product so you may be ok. :happy2:
cupra_k1:
--- Quote from: james on October 16, 2012, 06:43:54 pm ---Tb pipe, your running to much meth. What psi u injecting at?
If it is soaked ur tb will die also soon
Also what mix u running?
--- End quote ---
The thing is i'm only running a 126ml/min nozzle pre TB/DV which is located right at the bottom of the Throttle Body Pipe, which as far as i'm aware is far from excessive. The pump is set at 200psi from memory and i'm running a 50/50 mix.
cupra_k1:
--- Quote from: gazon69 on October 16, 2012, 07:11:12 pm ---
--- Quote from: Hurdy on October 16, 2012, 10:30:29 am ---James, the pump should really be below the bottle as it is gravity fed. If not it can cause pumping issues when the level drops and strain the pump. :smiley:
--- End quote ---
my bad, the instructions do state that the pump should be below and as close to the tank as possible. James, if you were to rotate your pump 180 degrees that would put the feed lines below your tank and suffice i would have thought. Though yours is a different product so you may be ok. :happy2:
--- End quote ---
How did you get on today mate? Did you manage to run it on Meth on the rollers?
gazon69:
--- Quote from: cupra_k1 on October 16, 2012, 07:22:24 pm ---
--- Quote from: gazon69 on October 16, 2012, 07:11:12 pm ---
--- Quote from: Hurdy on October 16, 2012, 10:30:29 am ---James, the pump should really be below the bottle as it is gravity fed. If not it can cause pumping issues when the level drops and strain the pump. :smiley:
--- End quote ---
my bad, the instructions do state that the pump should be below and as close to the tank as possible. James, if you were to rotate your pump 180 degrees that would put the feed lines below your tank and suffice i would have thought. Though yours is a different product so you may be ok. :happy2:
--- End quote ---
How did you get on today mate? Did you manage to run it on Meth on the rollers?
--- End quote ---
no mate, my wifes nan is in hospital on her death bed (god bless her) so been running about after the kids all afternoon. Gonna try tomorrow depending on what steves got on. :happy2:
cupra_k1:
--- Quote from: gazon69 on October 16, 2012, 08:08:43 pm ---no mate, my wifes nan is in hospital on her death bed (god bless her) so been running about after the kids all afternoon. Gonna try tomorrow depending on what steves got on. :happy2:
--- End quote ---
Sorry to hear that mate, fingers crossed Steve can squeeze you in at some point tomorrow! :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version