Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: jetta front bumper onto a 2.0 tdi  (Read 1846 times)

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
jetta front bumper onto a 2.0 tdi
« on: December 29, 2012, 10:29:32 am »
Off to pick one up shortly and I'm wandering if there is anything else I need to fit this.
I've got the set of grilles on order, the foglights, the two moulding trims and the lower splitter. Is there anything that goes behind the bumper that I need?

Also is fitting this a case of remove old one and replace with new one?
Logged
How hard can it be?

Offline chrisr763

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 0
  • -Receive: 62
  • Posts: 1777
    • Email
Re: jetta front bumper onto a 2.0 tdi
« Reply #1 on: December 29, 2012, 01:15:30 pm »
How much did you pay for the bumper?

And if yours was the facelift. So the GTI lookalike bumper then it is a straight fit, otherwise to bolt it on 'properly' and without having to cut your car up... You have to replace the front slam pannel and I think radiator... I voted for the cheaper cut the car up  :evilgrin:  :driver: :rolleye:

Its just plastic that didnt appear to do anything  :P
Logged

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #2 on: December 29, 2012, 04:42:27 pm »
Mine is a 57 plate, so what is needed to be cut? For the bare bumper i am paying £60 for a used genuine one.
Logged
How hard can it be?

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #3 on: December 29, 2012, 06:13:34 pm »
Found this

http://uk-mkivs.net/forums/t/437694.aspx

Only other worry is the towing eye, Has anyone left the standard cross members in and have a picture of where the towing eye screw sits?
Logged
How hard can it be?

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: jetta front bumper onto a 2.0 tdi
« Reply #4 on: December 29, 2012, 06:48:51 pm »
Had both an Xparts and genuine facelift on my old mk5, neither had a problem with towing eye access
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #5 on: December 30, 2012, 04:32:56 pm »
Was that a conversion from the standard bumper to a gti one?
Logged
How hard can it be?

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: jetta front bumper onto a 2.0 tdi
« Reply #6 on: December 30, 2012, 10:58:53 pm »
Pre facelift GT to Xparts. Looked ok but not quite 100%.

Xparts to genuine afterwards. Should have just skipped the replica and got genuine straight off.

Both bumpers had no issue with tow eye access on a late 55 2.0 TDI carrier.
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #7 on: December 31, 2012, 09:52:34 am »
Fantastic! Just what I wanted to hear  :happy2: Justin my way to pick up everything now, going from st helens to Manchester then onto Bradford then back home! Nice easy run for me!
Logged
How hard can it be?

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #8 on: December 31, 2012, 04:56:57 pm »
Bumper and grilles home. Got everything but sadily there was a set of non genuine grilles that fit like a glove on a foot! Only the lower centre grille fitted perfectly!

So if anyone has a non genuine bumper and is after the Jetta style grilles pass them this way!
Logged
How hard can it be?

Offline Veee-dubber

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 674
    • Email
Re: jetta front bumper onto a 2.0 tdi
« Reply #9 on: January 01, 2013, 11:20:37 pm »
How much did all the mouldings and grills come to in order to make it a complete bumper pal? I've been looking at the shells lately as that seems to be all that ever comes up!  :happy2:
Logged

Offline chrisr763

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 0
  • -Receive: 62
  • Posts: 1777
    • Email
Re: jetta front bumper onto a 2.0 tdi
« Reply #10 on: January 01, 2013, 11:29:49 pm »
Quote from: Veee-dubber on January 01, 2013, 11:20:37 pm
How much did all the mouldings and grills come to in order to make it a complete bumper pal? I've been looking at the shells lately as that seems to be all that ever comes up!  :happy2:

I found mine, genuine parts for 110. Was on ebay for 150 I think. I was on the phone to them within minuets of it being on ebay, as I was looking for a lot of parts at the time.



More photo's in my build thread  :happy2:
Logged

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #11 on: January 02, 2013, 09:53:51 pm »
Im just in need of the larger centre top grille now, So far it stands me at £120. That includes all the lower grilles, foglights and mouldings.

Got given a set of non genuine ones but not 100% sure on the fitment of them.
Logged
How hard can it be?

Offline Veee-dubber

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 674
    • Email
Re: jetta front bumper onto a 2.0 tdi
« Reply #12 on: January 03, 2013, 09:22:27 am »
^ not a bad price at all! where did you source the mouldings?
Logged

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: jetta front bumper onto a 2.0 tdi
« Reply #13 on: January 03, 2013, 01:40:31 pm »
Mouldings were with the bumper along with the splitter.
Logged
How hard can it be?

Offline Veee-dubber

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 674
    • Email
Re: jetta front bumper onto a 2.0 tdi
« Reply #14 on: January 03, 2013, 01:51:26 pm »
got pics of this? :)
Logged
Pages: [1]   Go Up
« previous next »