I have just been replacing my interior bulbs to LED ones , I just about finished and removed the boot one and it seemed to work once and now it seemed to have tripped the circuit ?
I scanned it with my VCDS and it now reads to faults which are listed below, any idea ? 

2 Faults Found:
02399 - Control Circuit for Terminal 30 for Interior Illumination 
            009 - Open or Short to Ground
             Freeze Frame:
                    Fault Status: 01111001
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 104
                    Mileage: 101805 km
                    Time Indication: 0
             Freeze Frame:
                        OFF 
                    Voltage: 12.25 V
                        OFF 
                        OFF 
                        OFF 
                        OFF 
                        OFF 
00059 - Terminal 30 for Interior Lighting 
            012 - Electrical Fault in Circuit - Intermittent
             Freeze Frame:
                    Fault Status: 00111100
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 144
                    Mileage: 101805 km
                    Time Indication: 0
             Freeze Frame:
                        OFF 
                    Voltage: 12.40 V
                        OFF 
                        OFF 
                        OFF 
                        OFF 
                        OFF