Make a donation

Author Topic: Has anyone got any measurements for the Forge TwinTake?  (Read 9674 times)

Offline NEWEY

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 9
  • Posts: 1066
    • Flickr
    • Email
Has anyone got any measurements for the Forge TwinTake?
« on: October 06, 2009, 12:58:14 pm »
Hi Guys im really interested in the forge TwinTake, anyone that has had this fitted. have you taken any measurements that you could maybe post up please like air flow measurements etc??

Thanks

TSR powered 1.9 16v mk2 Golf GTI
TSR big turbo mk5 golf gti

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #1 on: October 08, 2009, 01:05:47 pm »
apart from jonnnyc i dont think anyone has had the twintake fitted on here yet.

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 379
  • -Receive: 442
  • Posts: 16625
  • BIALI Motorsport's Chief Horn Blower
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #2 on: November 18, 2009, 09:12:06 pm »
....

Production versions of the Twintake are only now becoming available and so I'm sure technical info will follow in due course.

Meanwhile, here are a couple of sound clips to whet the appetite : -





I'm really looking forward to seeing and hearing the real thing in a couple of weeks time.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 379
  • -Receive: 442
  • Posts: 16625
  • BIALI Motorsport's Chief Horn Blower
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #3 on: November 22, 2009, 12:08:13 am »
....

Found a graph (from Forge, not independent) : -



Quote: "MK5 2.0T FSI TWINtake Dyno - 15 peak horsepower gain @ 6200 rpm with an impressive 49 hp improvement @ 2400 rpm and over 100 lb/ft of torque @ 2400 rpm over the stock airbox. Tests conducted back to back within 30 minutes of each other, without even removing the car from the dyno to install the TWINtake."
« Last Edit: November 22, 2009, 12:31:22 am by RedRobin »


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #4 on: November 22, 2009, 12:18:22 am »
results seem very good there.

I prob would have had one of these had they been more interested in trying to fit one to the vRS when i spoke to them, plus ITG were keen to fit it on mine.


when are you getting yours RR.

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 379
  • -Receive: 442
  • Posts: 16625
  • BIALI Motorsport's Chief Horn Blower
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #5 on: November 22, 2009, 12:40:58 am »
^^^^
Getting one in next few weeks and will post a review in due course.

First step was to make space for it by moving my BSH Catch Can - Sorted today with stokeballoon's valuable help.

JKM will be supplying and fitting and I want to do before and after dyno plots there as they have loads of data/logs etc on my car. Next week is looking busy for me so it'll have to be after next weekend's meet.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2945
    • My Car Blog
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #6 on: November 22, 2009, 12:59:05 am »
I presume that K03 based on the bhp level ?
but WOW that some area under curve gained by the Twintake  :surprised:  :happy2:
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 379
  • -Receive: 442
  • Posts: 16625
  • BIALI Motorsport's Chief Horn Blower
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #7 on: November 22, 2009, 01:55:21 am »
^^^^
Yep, K03 DSG comparison between with stock airbox and with Twintake.

The Twintake is getting the best of both worlds by using the two intake positions and greater total filter surface area plus fully enclosed filters.

I've recently spent quite a lot of time researching air intakes and now I understand how the Twintake works it's a no-brainer for me.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline snapey

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 9
  • -Receive: 22
  • Posts: 555
    • Email
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #8 on: November 22, 2009, 04:03:51 pm »
Love the sound of the intake from the inside on that clip, doesn't sound OTT  :smiley:

I thought mine sounded like a diesel on idle but that one is frankly shocking  :laugh:
If you have to ask why, you'll never understand.

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #9 on: November 22, 2009, 04:11:16 pm »
must admit the improvement in the lower rev range is very very good. you'll notice that in everyday driving as well, I think thats why the fuel pump and stage 2+ is so good, due to  the power improvement being mainly in the mid range

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #10 on: November 22, 2009, 04:15:18 pm »
I,ve had one on mine for a while now...

As far as measurements go I,ve not done anything like that....
It is better than my previous CAI(especially at higher revs)

May i ask what you previous CAI  was? Is it going to be worth me changing from Dbilas to Forge???

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #11 on: November 22, 2009, 04:52:57 pm »
i reckon you will get a huge increase on any ontake you go for tbh mike. especially with the ITG or twintake option. they have a huge filter area in comparison. Apparently the ITG sounds ace on the leon. looudest of the Vag group.

Plus they will al be lighter than the cast iron dbilias, lol.

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #12 on: November 22, 2009, 05:19:50 pm »
i reckon you will get a huge increase on any ontake you go for tbh mike. especially with the ITG or twintake option. they have a huge filter area in comparison. Apparently the ITG sounds ace on the leon. looudest of the Vag group.

Plus they will al be lighter than the cast iron dbilias, lol.

The ITG is louder on the on the octy I heard it walkin past twice today patroling the married quarters haha
(and the engine wasnt even running)

** sorry pointless post Guard is wank and boring, dont you miss being a class1 sy haha

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #13 on: November 22, 2009, 05:25:32 pm »
i reckon you will get a huge increase on any ontake you go for tbh mike. especially with the ITG or twintake option. they have a huge filter area in comparison. Apparently the ITG sounds ace on the leon. looudest of the Vag group.

Plus they will al be lighter than the cast iron dbilias, lol.

The ITG is louder on the on the octy I heard it walkin past twice today patroling the married quarters haha
(and the engine wasnt even running)

** sorry pointless post Guard is wank and boring, dont you miss being a class1 sy haha

only the rif raf have to do that mike, lol. And no i certainly dont miss doing that.

Offline yin

  • Always Involved
  • ****
  • Thank You
  • -Given: 77
  • -Receive: 18
  • Posts: 420
  • Seat Leon Cupra Tfsi Its nearly a Golf
    • Email
Re: Has anyone got any measurements for the Forge TwinTake?
« Reply #14 on: November 22, 2009, 05:26:03 pm »
ITG  is very loud on the Leon MIke