All Things Mk5 > Sat Nav and Car Audio
RNS 510 Installed but......
vRStu:
I think it's 2 and 3 on the blue part of the Quadlock connector that need swapping.
I'm guessing the antenna issue is the adaptor.
QD MBE:
The RNS I fitted had 2 aerial inputs.
Is the adaptor like the one in the link?
http://www.my-gti.com/1088/upgrading-2nd-generation-radios-rcd-300-rcd-500-to-3rd-generation-rcd-210-rcd-310-rns-310-rns-510-rcd-510-antenna-adapter
ollie288:
It is like the one in the pic except it did not have the wires. I was just a little block that connected onto the two origin aerial leads and then into the rns. The original colored plastic on the original aerial wires was removed.
Do you think this is the problem?
Cheers :happy2:
QD MBE:
All i did was remove the plastic shrouds from the original aerial leads and fit them straight onto the back of the RNS. The shorouds are removed really easily, they are the brown and grey bits in the pic below.
This will leave you with 2 x the below.
Then I just fitted them in the back of the RNS.
Stu may also have point.....................
QD MBE:
Good link too...........
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version