Make a donation

Author Topic: lose in power  (Read 1920 times)

Offline readie

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 32
lose in power
« on: October 07, 2009, 07:03:36 pm »
  driving home from work tonight i noticed a warning light on  i looked it up in manuel and symbal is exsaust system failure ive notice a loos in power as im runnin revo stage 1 & milltex i dont no what the standard power i because i brought the car with mods already fitted any advice welcome

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7834
  • ED30 No.1412
    • Email
Re: lose in power
« Reply #1 on: October 07, 2009, 08:06:57 pm »
When you say loss in power, is it a complete loss or just reduced?

I got a warning light and ran VAGCOM which said it was due to low fuel pressure. Turned out to be the pressure sensor.

Any way you could get your hands on VCDS?

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline cuprak1

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 627
  • Cupra k1 - 360 bhp/360 ft-lbs
    • London web design
Re: lose in power
« Reply #2 on: October 07, 2009, 10:01:04 pm »
is the car in limp mode? and do you still have the standard engine cover on?

SpeedStats iPhone app  - AVAILABLE NOW!
---------------------------------------
View my Cupra k1 project thread here! 360is

Offline readie

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 32
Re: lose in power
« Reply #3 on: October 08, 2009, 07:17:31 am »
hi the power is just reduce &yes the standerd engine cover is on going to garage today??

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2945
    • My Car Blog
Re: lose in power
« Reply #4 on: October 08, 2009, 07:48:16 am »
You should get a list of fault code/s on it.
These can be used to indicate whats wrong, by cross referencing with http://wiki.ross-tech.com/index.php/Category:Fault_Codes

For early cars you could need a fuel pressure sensor recall.
Most common are Diverter Valve failure and Coilpack failure , in your case the former is most likely.
But you also want to be looking out for cam follower wear if you have an early GTI

some good info http://www.golfmkv.com/forums/showthread.php?t=24952

let us know how you get on  :happy2:
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD