All Things Mk5 > How to Guides / Troubleshooting
How to change Fuel Pump Cam Follower on 2.0 TFSi
Pesky jones:
Believe the tsi's have a roller cam follower, but may be wrong.
as far tfsi goes, pretty sure just C
spwd:
So looks like I'm one of the unlucky ones with the fecking banjo bolt, I've read the whole thread and I'm not sure if I should even try it if there's a big possibility it won't seal correctly, what do you think?
Also any idea how much the no banjo mod costs, and unless I'm missing something it would be a good idea if the mods section had prices :happy2:
http://www.mk5golfgti.co.uk/forum/index.php?page=mods&mod=95
Octoparrot:
The metal fuel line is the expensive part, I got a secondhand one from the German eBay. The other bits are around £35 from the dealers. The banjo bolt is a pain to do but not impossible. If you end up keeping the banjo bolt I'd seriously recommend using a new one when you're putting it back together as the head can get chewed up quite easily. And make sure you use the correct triple square bit to remove and replace it.
spwd:
--- Quote from: Octoparrot on December 08, 2016, 06:58:45 pm ---The metal fuel line is the expensive part, I got a secondhand one from the German eBay. The other bits are around £35 from the dealers. The banjo bolt is a pain to do but not impossible. If you end up keeping the banjo bolt I'd seriously recommend using a new one when you're putting it back together as the head can get chewed up quite easily. And make sure you use the correct triple square bit to remove and replace it.
--- End quote ---
Cheers Octo but what do you class as expensive £100/£300 ?
Also just been Halfords and they've only got 1/2" triple square, absolutely no chance getting that in there :rolleye:
Octoparrot:
I don't remember the price but it's more than £100 which seems a lot for a bit of pipe. I got my triple square set from machine mart.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version