All Things Mk5 > How to Guides / Troubleshooting
How to change Fuel Pump Cam Follower on 2.0 TFSi
spwd:
I can't find any 1/4 drive m8s anywhere, might just give up and let R-tech do it .
shoaybmakda:
--- Quote from: Octoparrot on December 08, 2016, 06:58:45 pm ---The metal fuel line is the expensive part, I got a secondhand one from the German eBay. The other bits are around £35 from the dealers. The banjo bolt is a pain to do but not impossible. If you end up keeping the banjo bolt I'd seriously recommend using a new one when you're putting it back together as the head can get chewed up quite easily. And make sure you use the correct triple square bit to remove and replace it.
--- End quote ---
The banjo bolt on mine is knackered. I actually managed to get to my follower in the end without removing the banjo bolt but had to prise away very carefully the HPFP after loosening the fuel rails.
Need to get the bolt changed though if I can ever figure out how to get it off in the first place now!
Octoparrot:
--- Quote from: spwd on December 08, 2016, 08:06:49 pm ---I can't find any 1/4 drive m8s anywhere, might just give up and let R-tech do it .
--- End quote ---
Clarke CHT144 40-Pce Torx® Spline & Bit Holder Set
Back to product list
Product Code 040212750
Manufacturer sku 1800144
£23.99 ex. VAT
£28.79 inc. VAT
Qty
11 reviews
ADD TO BASKET
This Clarke CHT114 specialist driver bit set is suitable for those fixings which, because of their unusual design, aim to discourage tampering and interference. In order to access these fasteners, Clarke...Read more
7 hex bits: sizes from 4 to 12mm inclusive
5 XZN bits: sizes from M05 to M12 inclusive
7 Torx® bits: sizes from T20 to T55 inclusive
3/8" & 1/2" square drive adaptors
This is what I bought
spwd:
Is this the right one and is it 1/4" drive as I can't see where it says, not bad at that price :happy2:
Octoparrot:
Yep that's the one I bought and used. I'd also recommend getting some of those ratcheting spanners if you don't already have some.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version