hi guys after some advise i am utterly stumped with the fault i have got.
Friday,23,May,2014,19:41:13:38514
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.2.0 (x64)
Data version: 20140212
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine Labels: 06F-907-115-AXX.lbl
Control Module Part Number: 1K0 907 115 L HW: 8P0 907 115 B
Component and/or Version: 2.0l R4/4V TFSI 0030
Software Coding: 0403000318070060
Work Shop Code: WSC 01279 785 00200
VCID: 2F6D037CBE8B3E6632D-807A
1 Fault Found:
001089 - EVAP Emission Control Sys
P0441 - 002 - Incorrect Flow - Intermittent - MIL ON
Freeze Frame:
Fault Status: 10100010
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 126261 km
Time Indication: 0
Date: 2000.00.00
Time: 08:24:47
Freeze Frame:
RPM: 842 /min
Load: 15.7 %
Speed: 0.0 km/h
Temperature: 83.0°C
Temperature: 26.0°C
Absolute Pres.: 990.0 mbar
Voltage: 14.224 V
Readiness: 0000 0000
I have already replaced the N80 valve has anyone come across this and knows what to go for next. performace is ok, sometimes i can experiance a lumpy idle but i cant seem to pick anything up for it i have done a measured values test and i can't pin point the fault to anything. It can be intermitant as well so that doesnt help. If only i have guided fault finding to help me!
