All Things Mk5 > How to Guides / Troubleshooting

Heated seats

<< < (2/6) > >>

apollo13:
My 2ps worth.

When i did mine i used the wiring guide from Kufatec, I marked up all the wires with tape before i started the install.

When id finished it all worked fine apart from the switches were round the wrong way, ie the drivers switch controlled the passenger side and visa versa.

Obviously the Kufatec guide i had was for a left hooker so bare that in mind and double check it before inserting those pins!

That reminds me does anyone know where i can get a pin removal tool from? I need to swap mine around! :laugh:

Lee.

mk5rabbit:
you shouldnt need any special tools to switch the pins around. Just pull the 20-pin connector off the control unit, and the pins are held in place by a single clip. I used a small flat blade screw driver, and they pop right out!  :happy2:

apollo13:
Nice one mk5rabbit!

Ill go sort it out when i get in.

SeanyK:
I really want heated seats!

If I was to buy a Leather or ED30 interior which has heated seats, I take it I can just buy the Kufatec harness and the new climate panel with the heated seat buttons on?

Anyone near Essex who could help?  :laugh:

apollo13:
Sean,

Im near you and have done the re-fit  :happy2:  and i owe you!


Lee.

Navigation

[0] Message Index

[#] Next page

[*] Previous page