All Things Mk5 > Members Rides
Dazza's Maintenance Thread
th3_f15t:
DO you not find it strange that a job you started out thinking "I'd like to do that, seems like a good idea" very rapidly turns into an all consuming "I MUST DO IT, there's no other way"..?
dazza:
--- Quote from: th3_f15t on January 14, 2015, 08:17:54 pm ---DO you not find it strange that a job you started out thinking "I'd like to do that, seems like a good idea" very rapidly turns into an all consuming "I MUST DO IT, there's no other way"..?
--- End quote ---
Every single job on my car has been like that apart from the cherry red hazard switch.
I'm going to cover most of the inner door and not be so picky.
dazza:
A bit more progress today.
The inner skin in now deadened. TBH this is an absolute PITA don't think i will bother doing the other side.
And more problems the mid does not fit the door card i can probably get it screwed down but surely it needs to be a tight fit?
Also the stock large speaker fits flush to the piece of foam in the door card. The adapter does not again shouldnt it sit flush?
@xjay1337 any pointers here mate?
th3_f15t:
http://www.r32oc.com/topic/31759-fittingwiring-mk5-front-rear-speakers-3-door/ - This may help you if you haven't seen SIR32's guide before.
dazza:
Thanks mate i remember looking at that a while ago. People don't seem to be bothered about the gap between the mid and the door card. I will get the router out tomorrow and try and make an adaptor.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version