MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: scopes on February 13, 2014, 09:43:51 pm
-
Hey Guys
Fitted The polar FIS+ today, but it has not worked, also will not let me use vcds, any suggestions chaps?
:notworthy:
-
Take it out and send it to me... ill test it for you! :innocent:
-
Send me your address : :wink:
-
Bought it second hand, do they need to be coded in?
-
Hi Neil
Did you check the box "Telematics" in the gateway installation list?
All wires checked and double checked?
-
Hi Neil
Did you check the box "Telematics" in the gateway installation list?
All wires checked and double checked?
Nope, do i have to check the Telematics box in the list then, if so did i need to do that first, before i connected the box?
or
Is there another way?
:happy2:
-
Has it shown up on the Highline at all?
Scroll through the Highline onto the stock trip screen as VCDS can't communicate when on the polar screen (if that makes sense)
-
Yeah matey, that's makes sense, no polar screen showing up at all :confused:
-
when i hit gateway list on the vcds screen, function not supported by gateway!
-
Might need an update from polar to the correct screen for your car. Red dot or white dot.
-
:drinking: cheers for the helps guys!
Not sure what red dot white dot are?
Do i need to remove it from the car, before i can do an update, or can it be done still connected...?
-
MK5 will be red dot.. on the highline display :happy2:
Plug it into your computer and run the update on the polar website.
-
Seeing as you can't see it in the car probably best to remove and update I would think.
Red dot is the cluster you will have (mk5). White dot (mk6) etc
^^^ what Rich said :laugh:
-
Yeah it came from a mk5, i would assume it is red dot.
I can access the polar box, to connect the wire, is it safe to do so whilst connected to the car?
checking for photos !
-
i would take it out to update the box--Maybe a daft question but you do have high line display
-
In addition to the question of if you have a highline mfd, is your polar box plastic or aluminium? If aluminium is it silver or black?
-
Yeah have the high line display, do i need anything else...? :happy2:
Didn't fancy having to take it out again :sad1: :sad1: :sad1:
Left it in a place i could access the box, just encase it could be updated, when connected ! :ashamed:
-
Left it in a place i could access the box, just encase it could be updated, when connected ! :ashamed:
If connected then you need to update using the polar update in the configuration setting on the mfd screen.
If you can manage to disconnect the plug from the box then that puts it in update mode and can then be updated by just connecting your usb cable after getting on to the polar update site.
NB The site only works with Internet explorer
-
In addition to the question of if you have a highline mfd, is your polar box plastic or aluminium? If aluminium is it silver or black?
aluminium it is silver matey... uploading pictures now ......
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0532_zps3327ffd8.jpg&hash=49e6deeb114ccec51171452279cb8c4606e6dcee)
:popcornsoda:
-
i know when i have had a flat battery on my car mine doesn't work -so i disconnected the battery again leave it a fewminutes and it comes back on
-
Ok, if you get to the update site for the update you want to upgrade to FIS_Adv_v0.4.2RZ1(Red_dot)(EN_ES_FR_IT_PT). The updater will also show you if you have a PF03 (advanced) or not by the updates it offers you.
-
Left it in a place i could access the box, just encase it could be updated, when connected ! :ashamed:
If connected then you need to update using the polar update in the configuration setting on the mfd screen.
If you can manage to disconnect the plug from the box then that puts it in update mode and can then be updated by just connecting your usb cable after getting on to the polar update site.
NB The site only works with Internet explorer
:drinking: Cheers matey!
"update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...? :innocent:
If so then it needs removed :fighting2:
It's not doing any harm like this?
-
i know when i have had a flat battery on my car mine doesn't work -so i disconnected the battery again leave it a fewminutes and it comes back on
I could maybe try that now, say disconnect it for 10 mins?
.... just don't fancy pulling the polar out tonight...
-
Ok, if you get to the update site for the update you want to upgrade to FIS_Adv_v0.4.2RZ1(Red_dot)(EN_ES_FR_IT_PT). The updater will also show you if you have a PF03 (advanced) or not by the updates it offers you.
:happy2: Cheers B:
http://www.auto-polar.com/index-load-Polar_Fis.htm
:happy2:
But i still need to take it out of the car to do this :signLOL:
-
The box supports updating both in and out of the car.
If you call it a night and leave the polar disconnected from the car then it's possible that your battery may go flat tomorrow as the head unit may not fully turn off.
update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...?
Correct.
-
The box supports updating both in and out of the car.
If you call it a night and leave the polar disconnected from the car then it's possible that your battery may go flat tomorrow as the head unit may not fully turn off.
update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...?
Correct.
I will battle on :fighting: With your guy's support, we will get something sorted... :signLOL: Battery disconnected for now, until i find a lead!
-
Battery being disconnected did not seem to work :sad1:
So it needs removed to do the update, as i will not see it on the high line screen?
-
Battery being disconnected did not seem to work :sad1:
So it needs removed to do the update, as i will not see it on the high line screen?
Good luck with the update.
My gut feeling is that there is an issue with the polar cable itself as it's easy to break a wire at either end and not notice it without a close inspection.
-
Battery being disconnected did not seem to work :sad1:
So it needs removed to do the update, as i will not see it on the high line screen?
Good luck with the update.
My gut feeling is that there is an issue with the polar cable itself as it's easy to break a wire at either end and not notice it without a close inspection.
Cheer matey !
I have the box out, so when I go to the update page, it waits till I connect the lead to the polar, then goes to update/connect and shows up with problem! :sad1:
-
I was able to scan the car while the polar box was disconnected, also checked the gateway install list and the Telematics box is ticked !
PF03 model
-
I have the box out, so when I go to the update page, it waits till I connect the lead to the polar, then goes to update/connect and shows up with problem! :sad1:
What error message do you see, Device damaged??
PF03 means you have a Polar FIS+ Advanced.
The Telematics box is automatically checked with your model version of polar. By any chance do you have BT/telephone in your car as well?
-
No It seems to be internet explorer doing something, doesn't stay on screen long enough to see what it says..
No I have the Bluetooth unit there, but its not connected...
tried on two different computers so far, one with xp and the other wins 8...
-
You must do this in IE to allow the active X to be installed.
Go to internet options>security>custom level>scroll down to Download unsigned ActiveX controls and set it to prompt instead of the default Disable.
Go back to the web update page and allow the ActiveX to run. You should then be greeted with this screen.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.aibrahim.co.uk%2Fpolar.jpg&hash=4fff10c39c6a523e3acb285e450e48fff718e597)
-
Ayoub is the master of all things polar :notworthy:
-
:notworthy: :notworthy: :notworthy: :notworthy:
How do I get the activeX to run, is that just the reconnect/products available screen you up have uploaded as the picture...
again thanks for all the support ! :happy2:
-
:notworthy: :notworthy: :notworthy: :notworthy:
How do I get the activeX to run, is that just the reconnect/products available screen you up have uploaded as the picture...
again thanks for all the support ! :happy2:
If you've changed the Download unsigned ActiveX controls to prompt, save the changes. If you have a browser window open, close it/them then re-open IE and go to the polar update site. Once you get there you should get a pop up asking if you want to run the activeX, agree. You may have to click another run box thereafter you should then see the page looking like what I've just posted above.
Remember, get to the update screen as above before connecting your polar.
-
Pm' Ayoub ~!
-
Well with a BIG THANK YOU to Bacillus, got the polar updated ! :star:
Just need to double check everything is connected up correctly!
But not getting near it, as the weather is :scared: wild. :drinking: Here's to some better weather ! :signLOL:
But again thanks for all the support guys, will keep this updated as i progress :pomppomp:
-
fingers crossed it works now
-
The box supports updating both in and out of the car.
If you call it a night and leave the polar disconnected from the car then it's possible that your battery may go flat tomorrow as the head unit may not fully turn off.
update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...?
Correct.
if I disconnect the Polar box and not reconnect for.... a week, my battery will go dead?
So basically if you need to remove the box its best to remove the cable also?
-
I have the box connected, not showing up on the screen, just have not got to check the wiring... Could maybe loose or faulty... Will find out tomorrow :grouphug:
-
if I disconnect the Polar box and not reconnect for.... a week, my battery will go dead?
Yes, more than likely.
So basically if you need to remove the box its best to remove the cable also?
Yes unless you are removing the polar for only a short time
-
if I disconnect the Polar box and not reconnect for.... a week, my battery will go dead?
Yes, more than likely.
So basically if you need to remove the box its best to remove the cable also?
Yes unless you are removing the polar for only a short time
Good job this came up as I was going to take it out for a week or so from tomorrow. :star:
-
Hello mate, me and Mandy had this issue- we disconnected the negative from the battery then once Polar is all fitted, reconnect battery. You'll see the highline display come back on when you open drivers door. Now close the door again and lock the door with key fob. Wait for display to go out (look thru window), unlock car with key fob and open drivers door. Put key in ignition and use steering wheel arrows to scroll thru menus. Might be worth a try.
Also on my Polar box I had a dodgy cable, I used to have to wiggle it to make it appear on the screen. :happy2:
-
I have also had a dodgy cable on a friends car
-
Yup, I suggested to Neil that this may well be cable or a cable connection issue...
-
:drinking:
Well tried as Romocop had suggested, that didn't work out, check all the wire's seems ok... but when i was sitting flicking through the highline dash options the radio was showing up diagnostics connected, as it does when the VCDS is scanning, a bit of a sharp noise, like a record scratching... :signLOL:
I also don't have a mfsw!
So could well be a dodgy cable, they do look fragile !
If it has a dodgy cable, can this cause battery drain?
-
Neil you sometimes see that "diagnostics connected" at first start up of the polar.
I can't remember how you cycle through the various menu screens on your mfd (audio, settings, navigation etc) if you don't have a mfsw but can you please try doing so.
The polar desktop screen doesn't automatically show up when you first install the polar but once you display it and turn the ignition off, on restarting the polar desktop should re-appear as default.
-
Will go try that now matey thanks :wink:
-
I only have the normal wipper stalk also, could this be why?
with the option to move up and down and with the ok button...
For some reason i don't get the option to flick through music or audio, only through the rns510 with using the sat-nav, it then allows me to skip songs!
:confused:
-
I only have the normal wipper stalk also, could this be why?
with the option to move up and down and with the ok button...
For some reason i don't get the option to flick through music or audio, only through the rns510 with using the sat-nav, it then allows me to skip songs!
Hmm, I have a feeling that because you can't seem to cycle through the various menu screens you'll not be able to access the polar desktop screen even though the polar is working correctly.
Have you double checked your car manual as I'm pretty sure the menu screen cycling can be done using the wiper stalk.
-
think by the sound of it you might need the mfsw-wonder if any member with a high line and mfsw is near you can try the polar on there carto see if it works
-
I only have the normal wipper stalk also, could this be why?
with the option to move up and down and with the ok button...
For some reason i don't get the option to flick through music or audio, only through the rns510 with using the sat-nav, it then allows me to skip songs!
Hmm, I have a feeling that because you can't seem to cycle through the various menu screens you'll not be able to access the polar desktop screen even though the polar is working correctly.
Have you double checked your car manual as I'm pretty sure the menu screen cycling can be done using the wiper stalk.
I can go through different options, but the polar is not one of them, i get driving time,avg speed, distance travelled, fuel range, avg fuel, current fuel, speed warning....
but don't seem to be able to access main options...
Yes had a read through the manual, i'm seem to be doing things right...
-
I don't seem to be able to enter a menu options screen...
My high line was an after fit, 974 clocks if i remember correctly, is something missing?
long coding?
I'm near sure in my mates ed30, he can access different options than i can, but then i also think he has a different wiper stalk!
-
Shouldn't be a question about a stalk, i have the stalk you have with buttons for the menu, along with a afterfitted mk 6 MFSW and i can use both, as i have coded via VCDS the use of both.
Still sounds like the cable to me :happy2:
-
Test the cable with an multimeter.
-
Shouldn't be a question about a stalk, i have the stalk you have with buttons for the menu, along with a afterfitted mk 6 MFSW and i can use both, as i have coded via VCDS the use of both.
Still sounds like the cable to me :happy2:
:drinking: cheers Jake
Well i took it out, checked the wires, re-loaded the polar box, but still not showing up on the screen. I noticed when i hold the OK button in, i hear like a clicking noise coming from the polar box, then my RNS displays that "diagnostics connected"...
How did you code them in Jake? I have the RS4 steering wheel, but have been unable to get using buttons, always wanted to see what the "S" button would do :jumping: :signLOL:
Test the cable with an multimeter.
Rich, I'm not up to multi-metering, so was unable to test that way... But i'm sure i could get someone too show me or test it for me...
I am now also able to scan the car with vcds, as it was not allowing me to do that before.
Saturday,15,February,2014,14:41:52:05378
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: Release 12.12.0 (x64)
Data version: 20130910
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1K (7N0)
Scan: 01 03 08 09 15 16 17 19 25 37 42 44 46 52 56 75
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Malfunction 0010
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
75-Telematics -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06F-907-115-AXX.lbl
Part No SW: 1K0 907 115 T HW: 8P0 907 115 B
Component: 2.0l R4/4V TFSI 0010
Revision: 5BH16--- Serial number: VWX7Z0G63NC8GC
Coding: 0403000318070060
Shop #: WSC 00191 264 15243
VCID: 37797D98465886A6659-8062
1 Fault Found:
005696 - Internal Control Module
P1640 - 008 - EEPROM Error
Freeze Frame:
Fault Status: 01101000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 149678 km
Time Indication: 0
Freeze Frame:
RPM: 0 /min
Load: 0.0 %
Speed: 0.0 km/h
Temperature: 10.0°C
Temperature: 9.0°C
Absolute Pres.: 900.0 mbar
Voltage: 11.430 V
Readiness: 0110 0100
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
Part No SW: 1K0 907 379 AA HW: 1K0 907 379 AA
Component: ESP FRONT MK60 0102
Revision: 00H13001
Coding: 0004738
Shop #: WSC 01279 785 00200
VCID: 71ED838068BC18966BD-8024
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 1K0-907-044.lbl
Part No: 1K0 907 044 BE
Component: ClimatronicPQ35 090 0808
Shop #: WSC 00000 000 00000
VCID: 6BD191E84A90F246511-803E
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 3C0-937-049-23-H.lbl
Part No SW: 3C0 937 049 E HW: 3C0 937 049 E
Component: Bordnetz-SG H37 1002
Revision: 00H37000 Serial number: 00000003741322
Coding: E58F8F2700041800001400001400000000087F075C
Shop #: WSC 00000 785 00200
VCID: 2B5151E88A103246111-807E
Subsystem 1 - Part No: 1K2 955 119 C Labels: 1KX-955-119.CLB
Component: Wischer VW350 013 0402
Coding: 00065493
Shop #: WSC 00000
Subsystem 2 - Part No: 1K0 955 559 T Labels: 1K0-955-559-AF.CLB
Component: RegenLichtSens 011 1110
Coding: 00207646
Shop #: WSC 00000
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 R HW: 1K0 909 605 R
Component: 38 AIRBAG VW8 018 2200
Revision: 02018000 Serial number: 0038MD046H1V
Coding: 0013112
Shop #: WSC 01269 785 00200
VCID: 3B7161A87A70A2C6811-806E
Subsystem 1 - Serial number: 6332MSME0D453C5DQ
Subsystem 2 - Serial number: 6342MSME0D535D7BT
Subsystem 3 - Serial number: 6352QSME02512F67F
Subsystem 4 - Serial number: 6362QSME033B0A0BG
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 1K0-953-549-MY8.lbl
Part No SW: 1K0 953 549 AF HW: 1K0 953 549 AF
Component: Lenksäulenmodul 634 0070
Coding: 0000012
Shop #: WSC 00898 000 00000
VCID: 76E7B09C01D23FAEBEF-8023
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1K0-920-xxx-17.lbl
Part No: 1K6 920 972 E
Component: KOMBIINSTRUMENT VDD 4312
Coding: 0005403
Shop #: WSC 26086 444 52293
VCID: 34634A94572E6DBE40B-8061
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 R HW: 7N0 907 530 H
Component: J533 Gateway H42 1632
Revision: H42 Serial number: 310512F2001517
Coding: 350001
Shop #: WSC 12345 123 12345
VCID: 3F8915B8AE68BEE6AD9-806A
1 Fault Found:
01331 - Door Control Module; Driver Side (J386)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 72
Mileage: 149679 km
Time Indication: 0
Date: 2000.00.00
Time: 14:40:00
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 680 D HW: 1T0 035 680 B
Component: RNS-MID H03 3810
Revision: AB001001 Serial number: VWZ6Z7H6184085
Coding: 080004000400001800
Shop #: WSC 00020 790 12345
VCID: 2F6945F87E084E663D9-807A
1 Fault Found:
00856 - Radio Antenna
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 5
Fault Frequency: 2
Reset counter: 32
Mileage: 149672 km
Time Indication: 0
Date: 2000.00.00
Time: 13:04:46
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MIN2.lbl
Part No: 1K0 959 701 K
Component: Tuer-SG 024 2390
Coding: 0000564
Shop #: WSC 01279 785 00200
VCID: 3667709C41527FAE7EF-8063
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K2 909 144 L
Component: EPS_ZFLS Kl.074 H07 1806
Shop #: WSC 00903 210 57712
VCID: 356577905C5474B6775-8060
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1K0-959-433-MAX.clb
Part No SW: 1K0 959 433 BT HW: 1K0 959 433 BT
Component: KSG PQ35 G2 020 0202
Revision: 00020000 Serial number: 00000000000000
Coding: 98900A085103487F000285057008DA06009840
Shop #: WSC 06441 785 00200
VCID: 83015948C2009A06091-80D6
Subsystem 1 - Component: Sounder n.mounted
Subsystem 2 - Component: NGS n.mounted
Subsystem 3 - Component: IRUE n.mounted
1 Fault Found:
01331 - Door Control Module; Driver Side (J386)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 72
Mileage: 149679 km
Time Indication: 0
Date: 2000.00.00
Time: 14:40:00
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN2.lbl
Part No: 1K0 959 702 K
Component: Tuer-SG 024 2390
Coding: 0000564
Shop #: WSC 01279 785 00200
VCID: 37797D98465886A6659-8062
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 680 D HW: 1T0 035 680 B
Component: RNS-MID H03 3810
Revision: AB001001 Serial number: VWZ6Z7H6184085
Coding: 080004000400001800
Shop #: WSC 00020 790 12345
VCID: 2F6945F87E084E663D9-807A
1 Fault Found:
00856 - Radio Antenna
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 5
Fault Frequency: 2
Reset counter: 32
Mileage: 149672 km
Time Indication: 0
Date: 2000.00.00
Time: 13:04:46
-------------------------------------------------------------------------------
Address 75: Telematics
Cannot be reached
End ---------------------------------------------------------------------
-
Have a highline dash clocks and have had them fitted and coded, they are working, I don't have a MFSW only the wiper stalk, when I press and hold the up or down buttons no menu comes up. If I press it then i can change through the MPG, AVG speed, just no menu, and also it doesn't display the audio I am listening to - have an RNS 510, but when i use the sat nav, the sat nav comes on the highline dash ok!
I have been looking for ways to code or add in the wiper stock, anyone any ideas?
thanks
:happy2:
-
You've got 972 clocks so really speaking you will need a MFSW with the 'later' buttons that specifically have a Menu button.
-
:happy2:
Do you know if that would be possible through using the Audi rs4 wheel?
or
Would i need a different box or firmware?
New steering wheel :sad1:
-
Todays update :signLOL:
Removed the Polar box, no fault codes, but i did notice a few of the wires i could see bare wire. :surprised:
So can anyone give me any advice on what to do here please?
My suggestion is to sent it to a good fellow member to test for me, if its the wires, replace the lead, if it can be turned/changed to be used by a non-MFSW car...
Or can any of these things be done?
I would also like to find out how or if i can code in the wiper stalk to access the menu options...
Guys again thanks for all the help, really appreciate the support! :notworthy: :notworthy:
:drinking:
-
Which of the three connectors are you seeing bare wires? The one that plugs into the polar is a bit flimsy even when new. I think it's easy to test the integrity of the separate wires with a multimeter so choose that path in the first instance if it's local to you.
As for coding the stalk, perhaps Danishmkvgti could help seeing he can use his stalk for cycling the menus. I think that this is paramount as without that function being available, you won't be able to cycle through to the polar desktop even if it (the polar) is installed and working correctly.
-
Thanks Ayoub
Yes the wires that connect in to the polar box itself!
I will upload some pictures, might be hard to see, a small broken wire through a picture, will try anyways!
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0538_zps490e255d.jpg&hash=e9a4dd2f75da4a8706892f088c808d7eee8b4209)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0539_zpsc701a41d.jpg&hash=a0ecee28d4ccc6911208424e6d9fbd6d60bebdf9)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0541_zps94296ba7.jpg&hash=d564f56bae2a4d58aa19e228a73992408079ae6f)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0543_zps0a71c869.jpg&hash=72402a5a62c35c2980e153601e7df021bae58125)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0544_zps7aadc800.jpg&hash=fbb8f2489624d85397c345d54e0f1dd7bad58c85)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0545_zps959be262.jpg&hash=4858eda0371d6eaab498a0b34bed5ee290880d7a)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fyy295%2FScopes_GTI%2FDSC_0546_zps87a836cb.jpg&hash=239bd0b16c6bd15fb8a4e9fd66e3b4c536864436)
One of these might show the broken wires !
-
You can use the polar without a mfsw. Everything is done on the stalk. I can use either the stalk or the wheel on the vRS.
If you press and hold the lower rocker on the stalk then you should be able to get to the menu functions. Does that not work?
-
You can use the polar without a mfsw. Everything is done on the stalk. I can use either the stalk or the wheel on the vRS.
If you press and hold the lower rocker on the stalk then you should be able to get to the menu functions. Does that not work?
Hey Alex
No matey, even with the polar pulled out, i do not seem to able to access a menu function !
:sad1:
-
^^It was the same on our Altea, but the mk5 has a dedicated Menu button on the MFSW. Pretty sure stalk menu access only works with xx0/xx1 clocks.
Is fitting a MFSW not an option, Scopes?
-
Have the RS4 steering wheel in, love the feel of it :signLOL:
Mk6 steering wheel maybe, but what else is needed to add the mk6 wheel in?
Sell the rs4 wheel get an ed30 one and add the mfsw buttons !
must be away round it :notworthy: