All Things Mk5 > How to Guides / Troubleshooting
Parking Sensors OPS tutorial needed
Lyons:
Pashka what is the part number of your OPS module?
Pashka:
--- Quote from: Lyons on November 30, 2015, 12:19:18 pm ---Pashka what is the part number of your OPS module?
--- End quote ---
475A I think, not sure about letter. Will check later with VCDS. I have loads of them.
Lyons:
If you could confirm that would be great, I'll see what mine is too.
Rossimac:
--- Quote from: Pashka on November 29, 2015, 04:03:23 pm ---Gateway is okay, but soldering and the mess.. sorry, firstly cut all these wires you have soldered. Can you explain your picture? Can low and can high car? what does it mean? I can see only 1 pair, can high/low soldered to gateway on my schematics. It's easier to count the pins, not colour :drinking:
--- End quote ---
Soldering and mess: sure, I agree with you; it doesn't look like a great job.
Would like it to be redone by a more trained professional.
Rossimac:
--- Quote from: SI-R32 on November 29, 2015, 11:00:29 am ---Well hopefully you haven't damaged anything, I'm sure you'll sort it todsy
--- End quote ---
Sorted. I had used the wrong pin as I suspected. Put the incorrect pin back into its slot and used pin 6 instead like I should have originally. Stupid move on my part not to triple check.
Everything is now working as before thankfully and I got the sensors coded with on-screen guide!
Thanks to ALL in this thread!
--- Quote from: SI-R32 on November 29, 2015, 05:04:17 pm ---Not everyone can do the perfect job, plus if your relying on someone else your just hoping there able to make a good attempt, the solder joint whist not being the best in the world will do as long as it's insulated well.
You've got to remember not everyone is a retrofitter and has fantastic diy skills, so it might have to do for now.
--- End quote ---
Like I said, I'm not too pleased with the soldering job, but it will do for now as the system is working well.
He puts some insulating tape around each open circuit - he seemed happy enough.
I'm just stoked to have OPS working :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version