All Things Mk5 > Mk5 General Area
URGENT oil pressure stop engine
Nasir:
--- Quote from: Peskyjones on February 27, 2016, 02:08:11 pm ---I came off the track when I saw the warning. I then turned the car off and checked the oil level. Oil level was fine. Turned it back on and drove to the paddock and as I was coming to a stop it cut out!
Waited for it to cool down, scanned it and got the p0011 cam shaft a code. Tried to turn it on and it was just ticking over, rpm hardly budging, maybe 2-300 rpm. Now in the tow truck :(
--- End quote ---
Don't try to start it with an oil pressure fault. Not the same car, but my sister's 1.6 FSI kept flashing up with the STOP oil pressure light. Had the oil changed and it's been fine since. That being said, her car had no fault codes.
Pesky jones:
Yeah sorry I got it wrong, I wasnt thinking properly when typing the first post. My bad
r5gtt:
--- Quote from: Peskyjones on February 27, 2016, 02:27:52 pm ---Yeah sorry I got it wrong, I wasnt thinking properly when typing the first post. My bad
--- End quote ---
I'll let you off as it's a very stressful situation :sad1:
hope you haven't done too much damage but my guess is ypu have already done it. :scared:
callis:
100% blocked oil pick up pipe, Drain oil, take of sump and give it a good clean or replace strainer about £70 from dealers
then you just need oil and sealent :happy2:
wont be anything else, esp if oil level fine and no oil in your coolant
Pesky jones:
--- Quote from: callis on February 27, 2016, 03:44:48 pm ---100% blocked oil pick up pipe, Drain oil, take of sump and give it a good clean or replace strainer about £70 from dealers
then you just need oil and sealent :happy2:
wont be anything else, esp if oil level fine and no oil in your coolant
--- End quote ---
Well that is music to my ears, but what makes you so sure?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version