All Things Mk5 > Mk5 General Area
URGENT oil pressure stop engine
r5gtt:
Cam sensor error comes up when your oil strainer is blocked and there's no oil pumping into the cylinder head :surprised:
If you have any tools?, try turn the crank over manually with socket and rachet.
r5gtt:
@Peskyjones if it's the chain it would still run and rattle very loud from what I've read and heard over the years. did you really turn the car off or did it cut out on you as ive had this with a car and tried to drive it off the motorway and the car was rattling like f*** in the end engine seized.
dazza:
this isn't good :sad1:
hopefully its something simple.
r5gtt:
Could be the chain although you shouldn't have restarted her mate. that's the oil sign that tells you to stop the car meaning DO NOT attempt to start it again as its been discussed 100's of times as it's a failure and you should diagnose and rectify the fault before attempting to restart it which a lot of people fail to realise :sad1: and by then it's too late and major damage is done.
Above in the first post you said quote 》》》 I was coming to a stopthe engine cut out!
wont turn back on!
but now you're saying 》》》 . I then turned the car off and checked the oil level. Oil level was fine. Turned it back on and drove to the paddock and as I was coming to a stop it cut out!
Pesky jones:
Yeah I know :( The warning went when I turned it back on but still sounded like sh*t. Drove about 300 hundred yards before it cut out.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version