All Things Mk5 > Performance Modifications

Devils own w/m problem...

(1/3) > >>

Softishman:
Today I wited in my do w/m controller and when I switched it on I saw smoke right away... :thinking:
I have connected everything as described;
Black - ground (through a on/off switch)
Blue - pump minus
Yellow - w/m level sensor
Pink - ignition
Orange - battery 12V +
Green - map sensor

When I was switching it on i had forgot the plug in the map sensor connector but it shouldent be like this anyway?! The key wasen't even in the ignition!!
Pump is working whwn grounding the black wire and has a 10A fuse to battery.
Ignition is taken behind fusebox side of dashboard.
Green to lilac/green pin 14 on the connector front of the battery near the coolant hose.

So my controller is now cooked... :sad1:
What have i done wrong?
My controller is the 2.5 bar version...

Please help!!

Paradox1:
Is that the right size fuse with the kit? Can't remember what's in mine but I can check

Dan_FR:
10A is correct

Which install instructions have you followed? Do you have a DV100 or DVC30?

Softishman:
I put in a 10A fuse.
I bought the pump and controller from a friend who had them on his cupra...
Pump says DVL-8031
I followed dvc30 install.... :scared:

Dan_FR:
Which controller?

I daresay it sounds like you've followed the wrong set of installation instructions.

Navigation

[0] Message Index

[#] Next page