All Things Mk5 > Performance Modifications

Devils own w/m problem...

<< < (3/3)

Dan_FR:
Where did those instructions come from? Did you not check it with a multimeter?

If you have 100% wired it up correctly then the controller must be faulty - nothing else it could be

Softishman:
https://www.dropbox.com/s/9kbghk4re3574ju/DIYDevilsOwna.pdf?dl=0

Here is the instructions that i had.... Have to check with a proper multimeter again then... :sad1:

Softishman:
Hi again!

I have now tripple checked every wire and it all looks good. I measured on tje green wire while driving up to near 5V.... I must be the controller itself that are faulty... Is it worth 200$ for a new one or just order the pressure switch?

Softishman:
Just to share some info. It is the mosfet transistor on the board that are faulty and the reason was the connection terminals that was broken...
Hoping to just get a new trasistor and it should be ok again!

Navigation

[0] Message Index

[*] Previous page