So recently I haven't been using the golf as much due to buying a second car:D
Here she is
 IMG_6083
IMG_6083 by 
jamie kirk, on Flickr
I bought the corsa off a good friend who had had it since new, his in laws had just given him their old car so he was selling this. I bought it for £200 with just over a month left on the mot. Im not one to turn down a project so I did a bit of work on the car, I cleaned it up, serviced it and changed the exhaust and handbrake on it so it passed the mot. This monday I sold the corsa for £650 and during the month I had it I put about 1000 miles on it, so kept them miles off the golf:thumb:
This then gave me the chance to get the golf up on axel stands so I could take the arch liners off give them a good clean and then paint the disc hubs and repaint the red calipers as they had started to fade.
Heres just one pic to show them, the weather hasn't been good enough recently to get some good pics
 IMG_6145
IMG_6145 by 
jamie kirk, on Flickr
I had the golf on the axel stands for about 9 days, it wasn't until the day I took the golf off them that I realised I should have disconnected the battery.
The car wouldn't start so I had to jump start it from the corsa, I then took it for a drive and called in at shell to put some vpower in it. All good until I go to start it again and it wouldn't so I had to get someone to jump start it again and got it back home.
I was going to replace the battery before winter anyway so I knew which one I wanted anyway so ordered a Varta.
Heres the old one
 IMG_6118
IMG_6118 by 
jamie kirk, on Flickr
Battery out and air filter off
 IMG_6119
IMG_6119 by 
jamie kirk, on Flickr
Cleaned out
 IMG_6120
IMG_6120 by 
jamie kirk, on Flickr
I also cleaned the area where the filter sits as you can't get to it normally
 IMG_6121
IMG_6121 by 
jamie kirk, on Flickr
New battery in
 IMG_6122
IMG_6122 by 
jamie kirk, on Flickr
 IMG_6123
IMG_6123 by 
jamie kirk, on Flickr
Oil Filler NeckAs my car has the evoms intake kit on it the standard engine cover no longer fits without modifying it however I like the way it looks without. The oil filler has a neck on it so it sits flush with the cover, this neck is just held on by glue so I decided to get rid of it so my cap would then sit flush on the cam cover.
 IMG_6125
IMG_6125 by 
jamie kirk, on Flickr
 IMG_6126
IMG_6126 by 
jamie kirk, on Flickr
Cloth in to stop any plastic falling in
 IMG_6128
IMG_6128 by 
jamie kirk, on Flickr
Removed
 IMG_6130
IMG_6130 by 
jamie kirk, on Flickr
 IMG_6129
IMG_6129 by 
jamie kirk, on Flickr
After
 IMG_6131
IMG_6131 by 
jamie kirk, on Flickr
 IMG_6132
IMG_6132 by 
jamie kirk, on Flickr
I ordered an r8 oil cap from tps as I think they look nicer and just add a little touch to the engine bay
 IMG_6133
IMG_6133 by 
jamie kirk, on Flickr
 IMG_6134
IMG_6134 by 
jamie kirk, on Flickr
The next thing I set about changing was the washer cap and coolant cap as they was blue and didn't match anything in the bay so ordered the black set from AKS Tuning
Before
 IMG_6127
IMG_6127 by 
jamie kirk, on Flickr
 IMG_6135
IMG_6135 by 
jamie kirk, on Flickr
 IMG_6137
IMG_6137 by 
jamie kirk, on Flickr
And after
 IMG_6136
IMG_6136 by 
jamie kirk, on Flickr
 IMG_6138
IMG_6138 by 
jamie kirk, on Flickr
All three
 IMG_6139
IMG_6139 by 
jamie kirk, on Flickr
The next upgrade I bought was the gfb dv which i'm hopefully fitting with a friend next week
 IMG_6139
IMG_6139 by 
jamie kirk, on Flickr
 IMG_6148
IMG_6148 by 
jamie kirk, on Flickr
 IMG_6149
IMG_6149 by 
jamie kirk, on Flickr
I'm looking at getting the car remapped and will be upgrading the oil to millers nanodrive 5w40 so ordered a new oil filter and sump plug while at tps
 IMG_6150
IMG_6150 by 
jamie kirk, on Flickr
Finally
I am getting the cam chain and tensioner replaced in a couple of weeks so got the parts from tps 
 IMG_6151
IMG_6151 by 
jamie kirk, on Flickr
 IMG_6152
IMG_6152 by 
jamie kirk, on Flickr
Jamie