All Things Mk5 > Sat Nav and Car Audio

MFD2 ipod connectivity

<< < (2/4) > >>

jsd:
ok, so for the most minimal work, do i just unplug the cd changer from the armrest and add a connector to the lead? I'd happily swap my ipod for a cd changer!

Thanks for the Dension kit, its 80 pounds at halfords inc fitting, how hard isit to do yourself Steve?

thanks for the replies

SteveP:
You will need to connect it directly to the back of the head unit as the connector is different on each end.

Fitting is easy but means pulling a bit of the dash board apart.

TBH if the Halford one is this version - http://www.dension.com/GW100.php and you aren't too keen on pulling the headunit out then it's not a bad deal really.

jsd:
Ok will go down local halfords and let you know, any recommendations on where to get it online Steve?
thanks

SteveP:
I have used these guys before and found them to be very helpful, http://www.ipodcarkitdirect.co.uk

Just drop them an email to confirm if a do the CAN BUS version that supports the cluster display as there website isn't very clear.  :happy2:

Lean:
Does the Dension kit play via the radio ie: like a fitted FM transmitter or does it go through the system via the aux or something - Basically I just want to know is the sound 'normal' or 'FM' quality like the transmitters are ( I have one and the sounds poooo!)

Navigation

[0] Message Index

[#] Next page

[*] Previous page