Author Topic: Alarm siren not sounding but lights flashing when alam goes off.  (Read 5983 times)

Offline XxMK5xX

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 1
  • Posts: 26
    • Email
Re: Alarm siren not sounding but lights flashing when alam goes off.
« Reply #15 on: March 15, 2019, 11:59:58 AM »
Did you go for the 'F' siren? - I am assuming that the 'F' fitted (as the bodyshop) fitted mine - just wondering if that is the current siren part number and fitting is all good?  :happy2:

Offline bobby_fodge

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 3
  • Posts: 257
    • Email
Re: Alarm siren not sounding but lights flashing when alam goes off.
« Reply #16 on: March 15, 2019, 12:44:15 PM »
last night I bought the siren with the C suffix and have just been mailed from the parts company to say C is the old part and I'll be getting one with the F suffix as that is the current part and it'll work fine.

Offline Octoparrot

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 39
  • Posts: 481
    • Email
Re: Alarm siren not sounding but lights flashing when alam goes off.
« Reply #17 on: March 15, 2019, 04:00:26 PM »
Mine was a revision F. The rivets are 6mm diameter. Most rivet guns don't handle rivets that large. Maybe try to find some suitable plastic captive nuts to push in the holes and use screws instead.

Offline absolute

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 9
  • Posts: 232
    • Email
Re: Alarm siren not sounding but lights flashing when alam goes off.
« Reply #18 on: March 15, 2019, 05:22:50 PM »
Mine was a revision F. The rivets are 6mm diameter. Most rivet guns don't handle rivets that large. Maybe try to find some suitable plastic captive nuts to push in the holes and use screws instead.