Author Topic: BWA to BYB transplant - ECU/Loom question - please help  (Read 604 times)

Offline ljc19630

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 1
  • Posts: 160
BWA to BYB transplant - ECU/Loom question - please help
« on: July 17, 2019, 10:32:41 AM »
Guys
Can anyone advise if the loom from my BWA unit would be compatible to use with the ED30 BYD engine?

2 units I’m looking at. One is fully complete and the other without loom/ECU but can use my ECU till mapped by R-Tech.

Cheers
Louie
Cheers
Louie

Offline Pudding

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 438
  • Posts: 5200
Re: BWA to BYB transplant - ECU/Loom question - please help
« Reply #1 on: July 19, 2019, 05:18:37 PM »
Yes.  Just need BYD software due to the different sensor, injector and boost parameters.

If you swap ECUs, you will have to faff around getting it coded to the immobiliser etc.
Black Edition 30 with manually selected cogs, a beefier clutch, some extra boost and them Whiteline thingies, otherwise standard.