Author Topic: 17772/P1364 - Cylinder 4 Ignition Circuit: Open Circuit (HELP PLEASE)  (Read 90 times)

Offline edition30ldn

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 9
hi everyone , been having some rough idle and my boost gauge fluctuates for about 1 mins then the car seems to settle,
just pluged in vag com and geeting this fault 17772/P1364 - Cylinder 4 Ignition Circuit: Open Circuit  anyone had this or can help? changed the coils packs even put totally diffrent coil pick in and same code . this seemed to happen after i had a de cat and had a remap would this be the cause? thanks

Offline Rigsby

  • Always Involved
  • ****
  • Thank You
  • -Given: 21
  • -Receive: 10
  • Posts: 237
Re: 17772/P1364 - Cylinder 4 Ignition Circuit: Open Circuit (HELP PLEASE)
« Reply #1 on: September 06, 2019, 07:09:55 PM »
Check/swap #4 plug, then move onto coil pack loom

Offline edition30ldn

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 9
Re: 17772/P1364 - Cylinder 4 Ignition Circuit: Open Circuit (HELP PLEASE)
« Reply #2 on: September 06, 2019, 07:20:41 PM »
hey thanks for the reply. i changed the coil packs over and the code still showing on 4. how would i go about checking the connection on the harness?

Offline muff1991

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 50
  • Posts: 731
Re: 17772/P1364 - Cylinder 4 Ignition Circuit: Open Circuit (HELP PLEASE)
« Reply #3 on: September 09, 2019, 08:49:07 AM »
Sounds like you need to have a probe around with a multi metre. Just trace and check wires... must be a damaged or broken one somewhere.


Sent from my iPhone using Tapatalk