Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: carbonio induction replica  (Read 3346 times)

Offline WYTHIT

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 138
carbonio induction replica
« on: June 23, 2010, 05:57:55 pm »
Hi folks ive tried to fit a carbonio induction kit replica to my mk5 golf gti.
Im having problem getting the 2 screw into the front slam panel i can get a screw driver in the gaps to tighten the screws up
I hope im making sense can anybosy give me some tips please
Logged

Offline Aparoon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 792
    • Email
Re: carbonio induction replica
« Reply #1 on: June 23, 2010, 06:20:33 pm »
I had this same problem with a genuine one  :fighting:

Just got to jig it about and I found I couldnt fully tighten the screw...
Logged
Edition 30 DSG, Revo 2+,BSH Intake, Autotech hpfp, Blueflame TBE,  Eibach Sportlines, Speedline Turini's GONE

Offline WYTHIT

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 138
Re: carbonio induction replica
« Reply #2 on: June 23, 2010, 08:02:43 pm »
Ive managed to tighten up the left side next to the engine but i cant even get a screw near the left side its impossible.
And ive managed to loose a rubber gromit off the engine cover :confused:has anybody got a spare gromit for sale or know what the part number is?
« Last Edit: June 23, 2010, 08:04:25 pm by WYTHIT »
Logged

Offline Gti_Mad

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 12
  • -Receive: 40
  • Posts: 1458
Re: carbonio induction replica
« Reply #3 on: June 23, 2010, 09:30:13 pm »
the part number is 036 129 689b is wot i bought when i replaced mine at £2.13 each
Logged


Had the ED30, but not got the balls.

Mk5 silver 5door Ed30 1707- now sold
Mk6 silver 3door Golf R- current

Offline WYTHIT

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 138
Re: carbonio induction replica
« Reply #4 on: June 23, 2010, 09:49:24 pm »
Cheers mate i will going to stockport vw in the morning
Logged

Offline Gti_Mad

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 12
  • -Receive: 40
  • Posts: 1458
Re: carbonio induction replica
« Reply #5 on: June 23, 2010, 09:51:30 pm »
no probs dude  :happy2:
Logged


Had the ED30, but not got the balls.

Mk5 silver 5door Ed30 1707- now sold
Mk6 silver 3door Golf R- current

Offline WYTHIT

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 138
Re: carbonio induction replica
« Reply #6 on: June 24, 2010, 10:02:53 am »
Ive had another try at getting the screws in this morning and its not happening how do you fit these properly or are the just badly made?
Logged

Offline WYTHIT

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 138
Re: carbonio induction replica
« Reply #7 on: June 24, 2010, 10:10:43 am »
[img=http://www.freeimagehosting.net/uploads/th.c490b38fba.jpg]
i just cant get the screw anywhere near the mounting point
Logged

Offline illektronik

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 78
    • Email
Re: carbonio induction replica
« Reply #8 on: June 25, 2010, 01:54:42 pm »
You just need a long necked driver, or even a flexible one would help. It's easy when you have the tools. IIn this case, it also helps to have a magnetic bit on the end to hold it in place. You'll get there with some patience and the right tools.
Logged

Offline WYTHIT

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 138
Re: carbonio induction replica
« Reply #9 on: July 13, 2010, 06:58:05 am »
I bought it off here but they are for sale on ebay
I would stay well clear of them they are sh*t ive took mine off because it was forever coming loose
Logged
Pages: [1]   Go Up
« previous next »